Swap meet...

[srcarr52]

I have a near new 42" Oregon Power Match Plus bar 3/8 sprocket nose bar
to trade. It's the D025 mount which i believe is for the Stihl 460, 660 saws.
I need a 36" sprocket nose bar in the large Stihl mount for a 075, 076 saw.
With 3/8 tip. Must be in equivelent condition. I can email pic's to anyone
interested.
Thanks Lee

I think Baileys still has closeout Carlton bars in 33" or 34", large mount Stihl.

 

[nstueve]

Anyone got an 18" 3/8 small mnt husky bar and chain they can let go? I gots some cash for tradin.

I've got a 20in professional "Total" bar that is on a jonsered 2050 if it's the same???? let me know...

I have a near new 42" Oregon Power Match Plus bar 3/8 sprocket nose bar
to trade. It's the D025 mount which i believe is for the Stihl 460, 660 saws.
I need a 36" sprocket nose bar in the large Stihl mount for a 075, 076 saw.
With 3/8 tip. Must be in equivelent condition. I can email pic's to anyone
interested.

Thanks Lee

Seems to me I saw a Carlton 36in bar on Ebay a while back with a chain for $45... it was 404 though...

I think Baileys still has closeout Carlton bars in 33" or 34", large mount Stihl.

Due to previous problems I've had... I wouldn't buy closeout bars from bailey's...

 

[Scooterbum]

This is not the place for this kind of childish rant.

\Baileys has there own spot in the forum, try there and you'll reach the big cheese.

 

[nmurph]

I would talk with GrandeDog. He will make it right.

 

[nstueve]

This is not the place for this kind of childish rant.

\Baileys has there own spot in the forum, try there and you'll reach the big cheese.

You're right... I revised my rant to a simple statement. It really irritated me b/c I had work planned the following week that I couldn't do without the saw and lost money. Nobody likes it when their own pocket is hit... :msp_glare:

I would talk with GrandeDog. He will make it right.

I might message him/her, but the fact is that I already spoke on the phone with them. I should have received better help then, and not have to track another person down to "make things right". Thanks for the contact Neil!

BTW did mastermind get you a 026 brake handle. I might have a spare...

 

[nmurph]

You're right... I revised my rant to a simple statement. It really irritated me b/c I had work planned the following week that I couldn't do without the saw and lost money. Nobody likes it when their own pocket is hit... :msp_glare:



I might message him/her, but the fact is that I already spoke on the phone with them. I should have received better help then, and not have to track another person down to "make things right". Thanks for the contact Neil!

BTW did mastermind get you a 026 brake handle. I might have a spare...

Gregg is very good about getting around the noise of the bureaucracy.


Yes, Nathan, Randy took care of me. I also had several other offers...thanks to everyone!!!

 

[Eccentric]

I have a near new 42" Oregon Power Match Plus bar 3/8 sprocket nose bar
to trade. It's the D025 mount which i believe is for the Stihl 460, 660 saws.
I need a 36" sprocket nose bar in the large Stihl mount for a 075, 076 saw.
With 3/8 tip. Must be in equivelent condition. I can email pic's to anyone
interested.


Thanks Lee

Hiya Lee. I have a good condition (but not near new) 32" GB 3/8" pitch sprocket nose large frame Stihl mount bar. Not quite what you had in mind, but if you're interested in it send me a PM. I don't need the 42" D025 mount bar.............but I have a funny feeling that you've got all kinds of other stuff that'd be interesting...

I've got a 20in professional "Total" bar that is on a jonsered 2050 if it's the same???? let me know...

Steve I may be interested in that K095 mount bar if wyk isn't....

 

[Jon1212]

Anyone got an 18" 3/8 small mnt husky bar and chain they can let go? I gots some cash for tradin.

PM scented PM sent

 

[oldmanriver]

I may have the choke lever, I'll go take a look.

Hey Jacob, did you have one? Thanks

 

[tbone75]

PM scented PM sent

:bad_smelly:

 

[Jon1212]

:bad_smelly:

You stay out of this ya' GOOGBALL!!! This thread is for tradin' stuff..........:msp_wink:

 

[nstueve]

Gregg is very good about getting around the noise of the bureaucracy.

Yes, Nathan, Randy took care of me. I also had several other offers...thanks to everyone!!!

Ok guess Randy beat me and as much Bureaucracy as I deal with on a daily basis a little less wouldn't hurt!

Steve I may be interested in that K095 mount bar if wyk isn't....

It's nathan... Stueve is my last name... LOL...

Send me a pm; looks like the 18in might be taken care of by someone else...

What do you have to trade? got any stihl stuff? mostly looking for 029-390 farmboss, 026, 036, and maybe some dolmar 9010/9000 (as rare as that might be...). Shoot me a pm!

 

[tbone75]

You stay out of this ya' GOOGBALL!!! This thread is for tradin' stuff..........:msp_wink:

:msp_razz:

 

[nmurph]

Crankcase half

I'm back in the market for a starter-side crankcase half for a 372 (remember, a 362/365/371/372 will work). Someone's gotta have one stuffed away under their pillow. I will take the whole crankcase if needed.

 

[jockeydeuce]

I'm back in the market for a starter-side crankcase half for a 372 (remember, a 362/365/371/372 will work). Someone's gotta have one stuffed away under their pillow. I will take the whole crankcase if needed.

I have a F/W side off a 371, if you don't find one closer to home.

 

[homelite028]

wtb pioneer p50 p60 or p51

i am looking for one of theses models p50 p51 p60
my number is 606 -878-6285 ben
my email is [email protected]

 

[rms61moparman]

I am looking for a toasted

Poulan....2800, 3000, 3300
Craftsman...2.8, 3.0 3.3

I have a great top end, ignition, case etc.


Mike

 

[thomas1]

I am looking for a toasted

Poulan....2800, 3000, 3300
Craftsman...2.8, 3.0 3.3

I have a great top end, ignition, case etc.


Mike

I think I have some of those. Lemme check, this weekend.

 

[Arrowhead]

I'm needing a choke lever for a Husky 55.

 

[Mastermind]

I'd love to find a Poulan 4000..... :msp_wink: