etbrown4
ArboristSite Operative
Installed a new 20" Forester brand bar and chain (not Oregon) on this saw and the bar and or chain get hot and will bind up the saw after about 30 minutes of moderate sawing. I.E. at idle you cannot slide the chain with your hand, even though it's properly adjusted when cool.
Curious if others have encountered a problem like this.
There is plenty of lube on the bar and chain. When cool it cuts like butter! And it was properly adjusted when cool.
Curious if others have encountered a problem like this.
There is plenty of lube on the bar and chain. When cool it cuts like butter! And it was properly adjusted when cool.
Last edited: