What would be interesting is to run a 562 up against one of your 262's!
Best 50-60cc Husky saw
- Thread starter coolbrze
- Start date
Help Support Arborist Forum:
What would be interesting is to run a 562 up against one of your 262's!
Before I go fiddling with unproven technology I will stay with the old proven saws. I cut many trees with old technology with only one problem. I dont want to have a saw fail with a few tons of tree above my head. Especially when it counts most. I got a family to come home to. Later when all is well I will reconsider. My 346s have my trust like no other in that range of saw. I trust my life with them as they never failed.
o8f150
Tree Freak
maybe this will help you to decide,,, my 346xp after mastermind did his magic on it
<iframe width="560" height="315" src="http://www.youtube.com/embed/0DppGwFHYyg" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="http://www.youtube.com/embed/0DppGwFHYyg" frameborder="0" allowfullscreen></iframe>
sunfish
Fish Head
The Tech Lite bar is noticeably lighter than the standard bar and very high quality!
I have a 20" TL bar on mine. Super Nice combo!
sunfish
Fish Head
I still consider both my 346s' my favorite saws!
And are great fun to run!
:agree2:
Well put, I agree!! 346 would be my first choice for limbing and climbing work but the 562 will do a much better job bucking and using 20" 3/8 chain. The 562 is also the best handling, most nimble 60cc class saw I have run yet.
Last edited:
capetree
ArboristSite Member
I bought a 562 about a month ago and my 346 hasnt seen much use since then. I would say the 562 is much quicker stock limbing and bucking than the 346. My go to saw the use to be my 576 auto but in anyting under 10" theres only a difference in weight not speed . I run a 18" sugi hara bar and dont see any reason not to run a 20" on it. When chain is spent I will be changing it over to a 20" b/c so I dont have to reach as far limbing.
DarkTimber
ArboristSite Operative
What about a 357xp always thought they seemed to be good saws
sunfish
Fish Head
357xp is a very good saw! But the 562 is it's replacement and a much better saw. Husky got this one right! :msp_smile:
SawTroll
Information Collector
I'm sure it is :msp_smile: - but I'm not sure the TechLite is much lighter than a laminated bar, if at all.....:msp_confused:
Nice vid 08, that looks like some hard to cut wood. I wouldn't tune that saw any leaner. Steve
sunfish
Fish Head
Is there a laminated Husky bar in the large mount? All I have to compare is a solid Husky 20" and a Oregon power match 20". The Tech Lite is much lighter than both.
SawTroll
Information Collector
Yes, the Pro Lite is made in both 20" and 24" with the D009 mount.
Put a stihl chain on that 346 from Murph, so there, you got a stihl head response. Need to switch the husky bars to .050 so you can use the stihl chain
That 346 vid is pretty impressive, pushing hard and no bogging on what looks like petrified osage orange, that is cool!!!!
Thanks for the info Don. The 359 is a nice, proven design, but for 100$ more you can have a 562XP. I would have collected returnables on the road side to make that happen if I had too. I bought my 562 and promised to sell my 359 asap. Then I told the wife I needed it as a backup saw. All of a sudden I had a 6'1" redhead flipping out and threatening to write a craigslist ad.
I sold it to a good friend who promised to sell it back to me. Then he moved to pennsylvania
. Russ
I sold it to a good friend who promised to sell it back to me. Then he moved to pennsylvania
. Russ
sunfish
Fish Head
Put a stihl chain on that 346 from Murph, so there, you got a stihl head response. Need to switch the husky bars to .050 so you can use the stihl chain
That 346 vid is pretty impressive, pushing hard and no bogging on what looks like petrified osage orange, that is cool!!!!
I buy lots of .058" Stihl chain here. No need to go .050". :msp_wink:
sunfish
Fish Head
Thanks for the info Don. The 359 is a nice, proven design, but for 100$ more you can have a 562XP. I would have collected returnables on the road side to make that happen if I had too. I bought my 562 and promised to sell my 359 asap. Then I told the wife I needed it as a backup saw. All of a sudden I had a 6'1" redhead flipping out and threatening to write a craigslist ad.
I sold it to a good friend who promised to sell it back to me. Then he moved to pennsylvania
Just save yer pennies for a 346xp and you'll forget about that 359!!! :msp_wink:
sunfish
Fish Head
OK, I forgot about the Pro Lite. I have them in .325 small mount, but no large. Good bar!
nmurph
ArboristSite.com Sponsor
Yeppers!!!!!
