WKY GTG Fall 2012

Shop deals on ebay
Wesspur
Rugged made
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
dwraisor said:
Tried to send you a PM but your inbox is full... search the bay "Stihl Multi tool" and a few pop up. One of them gives the PN.


dw
Click to expand...

Thanks for the info man. And for the PM box reminder. Those things fill up before you know it. :D

o8f150 said:
yea,,, deep fried :angry::angry: but it was a good one though,, i have to admit that :D
don't worry,, i will get that midget someday:cheers::cheers:
Click to expand...

I'm in the Elephant legs club I guess. :D I'd throw you and Randy a few chunks of ham hock if I could. :laugh:
 
Roll Tide sent me a pic of him and his son dressed up for Halloween.......

imagejpeg_2_17-2.jpg


Cute huh? :rock:
 
Guido Salvage said:
$30 seems a bit pricey (even with a pouch).
Click to expand...

Yea, that was my first thought as well. Not sure i'd have paid that much.... It is a handy tool though T-27, scrench, carb screwdriver all on a belt pouch, and one you can't leave it in the shirt pocket to tear up the washing machine, so maybe $30 would have been good insurance for some. :msp_sneaky:


dw
 
To answer any ??s about my 4 cube here is some info on it. This cyl was off of a Jred 2165 I built for a friend of mine. I traded cyl with him so I could have a 4 cube for Terrys build off. I don't recall where I ever said it didn't have any transfer work done to it since all of my quadport Sweedish saws have lower transfer work done. This cyl is pretty much the same as I do all the 372's. Here's the thread of that Jred. http://www.arboristsite.com/chainsaw/195470.htm

I haven't changed any of the portwork since I put it on the Husky case. I am running a 385 carb. It does have a different piston since the one that was in it for Terry's GTG came apart on me. I used the original piston that had the crown all chewed up since I didn't want to put any more $$ in it than necessary. I turned around .050" off the top of the piston & had to cut the base to get the squish back to where I wanted it. That lowered the intake floor more & increased my dur to the high 170's.
That is the only change since Terry's.

Glad to see ya'll had fun. I intended on makeing it, but just have way to much going on right now.
I'll try to make it to the next one.
 
Stumpys Customs said:
To answer any ??s about my 4 cube here is some info on it. This cyl was off of a Jred 2165 I built for a friend of mine. I traded cyl with him so I could have a 4 cube for Terrys build off. I don't recall where I ever said it didn't have any transfer work done to it since all of my quadport Sweedish saws have lower transfer work done. This cyl is pretty much the same as I do all the 372's. Here's the thread of that Jred. http://www.arboristsite.com/chainsaw/195470.htm

I haven't changed any of the portwork since I put it on the Husky case. I am running a 385 carb. It does have a different piston since the one that was in it for Terry's GTG came apart on me. I used the original piston that had the crown all chewed up since I didn't want to put any more $$ in it than necessary. I turned around .050" off the top of the piston & had to cut the base to get the squish back to where I wanted it. That lowered the intake floor more & increased my dur to the high 170's.
That is the only change since Terry's.

Glad to see ya'll had fun. I intended on makeing it, but just have way to much going on right now.
I'll try to make it to the next one.
Click to expand...
I hope everything is ok with you stumpy. Hang in there and looking forward to more post from ya.
 

Similar threads

Mrs. J
Rsvp wky gtg oct 2012
3 4 5
Replies
90
Views
4K
Termite
Termite
WoodChuck'r
GTG in Upstate NY. NYCSM style.
2 3 4
Replies
70
Views
4K
spike60
spike60
Erick
Whos up for a GTG 25mi North of Louisville KY?
39 40 41
Replies
804
Views
26K
ericjeeper
ericjeeper

Latest posts

Back
Top