Swap meet...

[jbird77]

lookin

Well if I can I will convert him , he said he would be fine with that

 

[tomdcoker]

does anyone have a carb and a coil for a 032 stihl

I have a coil for a points system and should have a carb. I will have to check on it. If you do not hear from me by tomorrow night send me a PM. Tom

 

[michale34]

I have a coil for a points system and should have a carb. I will have to check on it. If you do not hear from me by tomorrow night send me a PM. Tom

thanks

 

[RedneckChainsawRepair]

Looks like I'm in need of a crank for a SP81 if someone happens to have one available.

edit: Never mind. Found one on eBay and just bit the bullet. Ouch!

Watcha expect for a $50 parts saw You were almost in my back field when you picked that one up.

 

[cat-face timber]

Husky 288 parts saw or just parts

I find myself needing a Husky 288 parts saw.

I have some smaller Huskys some MAC parts and very little folding green paper.

Thanks..

 

[jimbo1490]

Like New Pouilan Pro 405 Plus for trade

I've got a like new Poulan Pro 405 Plus for trade. I got it from the original owner . He told me it had only ever had a few tanks through it and it looks like him speakum truth. It has the original 24" bar and original chain. Chain is not worn out and only needs a touch up. Bar rails look great.

I'm looking for interesting Stihl or Husky trades. It'll go to ebay if no interest here.

jimbo

 

[PogoInTheWoods]

Watcha expect for a $50 parts saw You were almost in my back field when you picked that one up.

I musta missed the "no trespassing" and "no hunting" signs....er somethin'....:msp_wink: Nah, I knew the crank had a chunk out of it at the key-way, just not that BIG of a chunk. And it did pop, but sure as hell wasn't gonna run for long or cut anything 'cept maybe the rest of the crank or destroy the flywheel with the uneven stress/torque.

So where are ya? Crestline?

 

[RedneckChainsawRepair]

So where are ya? Crestline?

I can see Crestline from the house across the fields. :msp_wink:

Seen that 81 on CL too. Just not a Mac guy.

 

[PogoInTheWoods]

I can see Crestline from the house across the fields. :msp_wink:

Seen that 81 on CL too. Just not a Mac guy.

It came with a complete and running Homie-17 to keep it company for the ride home. Both saws are actually in damned good shape with the exception of the 81 crank -- which let loose the night before the guy posted the CL ad. I'm guessing there was some kind of "fix" in place for the keyway that didn't hold and the guy just decided to call it a day....since he had a 2100 on the way from somebody across the other side of your field. Guess we both missed that one!

I'm an ol' Lexington boy, so sorta know the stompin' grounds and back roads down that way.

 

[RedneckChainsawRepair]

I'm an ol' Lexington boy, so sorta know the stompin' grounds and back roads down that way.

I wouldnt have been after a 2100 either.

I used to live down by Clearfork reservoir across rt 314. Many years ago.

 

[mcdarvy]

looking 4 a 272 recoil cover

looking for a 272xp recoil cover, 268 266 61 68 exc

i have ms170- 180 ,,ryobi 40cc parts for trade, or cash.

 

[jeepyfz450]

I am looking for a muffler for an 084. i am also looking for a chain brake handle for an 084. i have some misc stihl parts to trade and the green stuff. thanks

 

[Eccentric]

Have I said this to you before???

I can see Crestline from the house across the fields. :msp_wink:

Seen that 81 on CL too. Just not a Mac guy.

I wouldnt have been after a 2100 either.

I used to live down by Clearfork reservoir across rt 314. Many years ago.

Nobody's perfect Kevin.

 

[HittinSteel]

In need of a good sprocket roller bearing for a Husky 2100.

 

[srcarr52]

In need of a good sprocket roller bearing for a Husky 2100.

FYI, it's the same as a 181,281,288,394,395.

 

[HittinSteel]

thanks for the heads up......if someone doesn't have an extra I'll find one on ebay

 

[richard t]

Any parts for a dolmar 111 mainly muffler gas tank about anything or a whole saw if price is right you can pm me Thanks

 

[PainAndMurphy]

in need of matching rear handle assembly

for either one of these:

STIHL MS200T (need an MS200 handle ass'y)

ECHO CS341 (handle ass'y of 346? 305? 306?)

ECHO CS360T (I know there was rear handle assembly for the same platform! can't recall model..)


I'm very open for trade offers!!

Jo.



==============

EDIT:

Would even trade a whole saw, or buy (and pay shipping) for a seized saw!

 

[Big_Wood]

I'm finding myself in need of a carb for a Husqvarna 353 guys. traded an old poulan I got for it. it runs sweet at idle but needs the high speed jet turned right out to get it to 4 stroke. I pulled it apart expecting it to be dirty but it was all pitted beyond repair. looks to me like it sat for a while with water in it then the guy cleaned it and traded it off to me owell once I get a carb it will be good to go. runs real nice with the high speed turned way out but want a new carb because I just can't live knowing the carb body is pitted internally. please PM me if you can help me out

 

[Eccentric]

Shane check those crank seals too.