dieselfitter
ArboristSite Guru
Mmmm, what time is dinner?
Minnesota,Wisconsin,Iowa, Dakotas GTG's thread
- Thread starter andydodgegeek
- Start date
Help Support Arborist Forum:
andydodgegeek
The stool maker
MMM, Sarah's cookin' BACON!!!! I'm havin BACON for dinner.
srcarr52
We can't stop here, this is bat country.
Breakfast for dinner is my favorite.
andydodgegeek
The stool maker
Mmm Bacon
Homelite410
Hack with a CNC Mill
I could eat breakfast 3 times a day!
Derrick Johnson
ArboristSite Operative
How about those races... Haven't herd much jabber on here about them. Are they still planed for the 15th. I'm getting kinda jumpy.... ;]
HEAVY FUEL
Addicted to ArboristSite
Your only jumpy because you been sniffing that nitro...
Sent from The Better Side of the River....
Sent from The Better Side of the River....
Homelite410
Hack with a CNC Mill
I made progress on squeak 2 today.
72cc dual port this time
72cc dual port this time
Derrick Johnson
ArboristSite Operative
Nice
grandpatractor
Addicted to ArboristSite
the hubcaps really make it look nice
andydodgegeek
The stool maker
I had to replace valve stems in two truck tires tonight. In the past breaking the beads was usually a pain it the rear but I figured out a good way to do it. I was standing in the garage thinking what can I use to break these beads, the skidsteer works but not the greatest, then it hit me. The log splitter. It worked SWEET!!! Thought I would pass this on to any of you who enjoy a little hillbilly ingenuity. I put a piece of angle iron on the wedge just so it was not as sharp and then stood the tire up and took a short piece of 2x4 and pushed against it with the ram. Worked perfectly. I was very excited. I seem to have to mess around with tires quite a bit in my shop and finding a good way to work with them is nice.
andydodgegeek
The stool maker
I'm gonna cut a little more wood out by the boiler tomorrow if anyone wants to join in let me know. Bring a saw or try out one of mine. I know me and Sarah will be here and Dieselfitter (Tim) said he is gonna come over. It's supposed to be fairly cold but if we want to warm up it's only 30' to my 65 degree shop.
midiver67
ArboristSite Lurker
Ran my Stihl MS390 today but only for a little while. I'm pretty sure I'm not getting any oil to the chain. I used a toothpick to clean out the port. This is probably pretty novice of me but, any other suggestions?
Winter or summer grade oil? Don't know how old you saw is or if it was oiling OK recently.
See if oil flows with the bar removed? Rinse out your oil tank if it looks gummed up? Replace your oil filter?
Philbert
See if oil flows with the bar removed? Rinse out your oil tank if it looks gummed up? Replace your oil filter?
Philbert
midiver67
ArboristSite Lurker
Thanks! I may have not been using winter grade oil.
If I didn't have a hockey game I'd be there. Lost to the cake eaters 4-2 tonight.
andydodgegeek
The stool maker
Yeah definitely try running the saw with the clutch cover and bar off to see if you are getting any flow. Like philbert said check to make sure the filter isn't plugged. If all looks good there the plastic oil pump driver could be stripped, a very easy fix. If you need help with any of it let me know, I don't live too far from St Croix Falls.
Oil pump drive gear would be a good thing to check. Had to replace one on an 021 - pretty easy, once I finally thought to look there.
Philbert
Philbert
sarahdodgegeek
The shirt lady
Wow. Thank you so much, dieselfitter, for calling us up! What great friends we have meet through this place! dieselfitter (aka Tim) and jonsered Racket (aka Dale aka Adam) came up yesterday & cut some serious wood yesterday! Can't thank you guys enough! Plus.... It was fun hanging out, so bonus...
Sent from north of hwy 8
Sent from north of hwy 8
