SawTroll
Information Collector
Yes, they look nicer - but the streight across handlebar isn't a good idea when limbing etc.
Jonesred and husqvarna
- Thread starter clayczech
- Start date
Help Support Arborist Forum:
Yes, they look nicer - but the streight across handlebar isn't a good idea when limbing etc.
clayczech
ArboristSite Operative
Would the handle bar from an orange work on a red?
SawTroll
Information Collector
Some times yes, some times not, you may need to change the tank as well - but it wouldn't look great anyway - and then the chain brake handle is at a different angle as well.....
I'd just forget the idea!
clayczech
ArboristSite Operative
Geez sounds like I won't even try. [emoji17]
SawTroll
Information Collector
clayczech
ArboristSite Operative
You guys are lucky. I wish we had them here. [emoji30]I surely wouldn't - but then we have the 560xp/xpg here!
SawTroll
Information Collector
Many Americans wish that, but I doubt it will happen when it hasn't already.....
Vibes
Addicted to ArboristSite
clayczech
ArboristSite Operative
Ya their number system is crazy! I never keep them straight.[emoji17]
clayczech
ArboristSite Operative
I doubt it and it's not worth shipping one over here.
SawTroll
Information Collector
It isn't that hard - you just have to know!
No brand has totally logic model numbers, that fits wth the cc etc.
SawTroll
Information Collector
No, as saws cost much more anywhere else, than in the US.
clayczech
ArboristSite Operative
I've been studying their products. It's taking me a while thoughIt isn't that hard - you just have to know!
No brand has totally logic model numbers, that fits wth the cc etc.
clayczech
ArboristSite Operative
I've checked into it. It would cost me over 1000 bucks to get one over here. I got my 562xp for 650.
SawTroll
Information Collector
I believe the UK generally have the lowest prices in Europe, but I haven't looked closely into it. Sweden, Germany and Norway likely is the high end, but I haven't really looked closely into it.....
Thornton
40:1 wide open like a chicken on a chain
I'm going to check out some reds tomorrow mainly 2253
nmurph
ArboristSite.com Sponsor
Isn't the 560 available in Canadada?
spike60
Addicted to ArboristSite
Geez, an extra digit in the model number really confuses you guys? Jonsered numbers all start with either "21" or "22" similar to Husky's starting with a "3" or "5". Doesn't seem that complicated to me.
On the handle swaps, it all has to do with whether or not the tanks castings are the same except for color. 372/2171 and the older 272/670 families used different castings and handles would not interchange. The primary difference is the spacing of the handle bolt holes on the clutch side. Most other saws use the same castings and the handles will swap back and forth. But as pointed out, you will then have a mismatch between the angle of the handle and the hand guard. On some saws, this is an issue and on some it's no big deal.
I disagree that the Jonsered handle makes any difference in limbing, but some folks like to beat that drum. (sorry Niko). It's just a 7 degree offset, so how big of a deal can that be? Maybe Jonsered owners just never limb trees, huh? I have plenty of Red and Orange saws and I don't even notice it.
On the handle swaps, it all has to do with whether or not the tanks castings are the same except for color. 372/2171 and the older 272/670 families used different castings and handles would not interchange. The primary difference is the spacing of the handle bolt holes on the clutch side. Most other saws use the same castings and the handles will swap back and forth. But as pointed out, you will then have a mismatch between the angle of the handle and the hand guard. On some saws, this is an issue and on some it's no big deal.
I disagree that the Jonsered handle makes any difference in limbing, but some folks like to beat that drum. (sorry Niko
). It's just a 7 degree offset, so how big of a deal can that be? Maybe Jonsered owners just never limb trees, huh? I have plenty of Red and Orange saws and I don't even notice it.
Vibes
Addicted to ArboristSite
Geez, an extra digit in the model number really confuses you guys? Jonsered numbers all start with either "21" or "22" similar to Husky's starting with a "3" or "5". Doesn't seem that complicated to me.
On the handle swaps, it all has to do with whether or not the tanks castings are the same except for color. 372/2171 and the older 272/670 families used different castings and handles would not interchange. The primary difference is the spacing of the handle bolt holes on the clutch side. Most other saws use the same castings and the handles will swap back and forth. But as pointed out, you will then have a mismatch between the angle of the handle and the hand guard. On some saws, this is an issue and on some it's no big deal.
I disagree that the Jonsered handle makes any difference in limbing, but some folks like to beat that drum. (sorry Niko
That numbering system is confusing especially if you are at the chainsaw counter and you ask that guy " Is this the same saw as the 346 Husky?" and he says yes. My Jonsered dealer is an old time dealer and could give a rats arse about Husky. My BAD!!! But like I said, I love my 2152.
I would like to try a 2153 though. May be that different angle on the handle keeps it from falling over when its idling on the ground.
Other than that I haven't really noticed, or had a preference over, the red saws or the orange saws. I go red because the dealer is 3 miles away from my house and the other is 4 miles from camp.
