The Official, 2nd. Annual Pennsylvania Spring GTG (May 9, 2015)

[Stihl 041S]

Hey Rob,
You bringin them husky bars along ??
I could use a small mount 3/8" .050, 72dl............friend of mine is looking for the same thing in husky large mount...
I got 1 husky to pass on to someone else...other than that I'm 100% creamsicle...

I'll bring what I got!!!!!!

 

[psuiewalsh]

This 064 will take a hd2 filter . I'm not sure if they had different filters available . My air filter cover is plastic . The nob looks the same as my 660 and 460 . If that will work I can swipe one off one of mine for you to use


Sent from my phone when I should be working

If it is the metal cover it is a different knob to go with the flat mesh filter. You would have to swap out the carb base plate to the HD filter and cover setup as the stud for the filter is different.

Have you tried a washer and a 5mm nut over the mesh filter to hold it in place?

 

[psuiewalsh]

I'm really thinking about attending if it's not too late. Can someone teach me how to adjust a couple carbs correctly on a couple saws? I can hear what good running saw sounds like BUT I can't seem to be able to adjust one to sound good.


Sent from my iPad using Tapatalk

Howdy neighbor.
KEith

 

[farmer steve]

I'm really thinking about attending if it's not too late. Can someone teach me how to adjust a couple carbs correctly on a couple saws? I can hear what good running saw sounds like BUT I can't seem to be able to adjust one to sound good.


Sent from my iPad using Tapatalk

should i put you on the list?

 

[psuiewalsh]

Chuck. I plan on bringing the bar for you to look at as well.
Keith

Sent from my C771 using Tapatalk 2

 

[MGoBlue]

Put me down for bringing rolls (unless I missed someone else's previous) and a case of bottled water. If there is anything else I can bring, lmk.

 

[psuiewalsh]

If it is the metal cover it is a different knob to go with the flat mesh filter. You would have to swap out the carb base plate to the HD filter and cover setup as the stud for the filter is different.

Have you tried a washer and a 5mm nut over the mesh filter to hold it in place?

I looked at the IPL and it looks like all covers use the same nut. It does not specifically show it on the metal one but looks like it

 

[BigOakAdot]

Anyone have a 42" .404 bar that fits an 076
?

 

[showrguy]

Anyone have a 42" .404 bar that fits an 076
?

I have a 41" .404 ES that lives on one of my 880's, if you need one to try.....

 

[Knobby57]

Anyone have a 42" .404 bar that fits an 076
?

I have a brand new 30 " ES .404 bar


Sent from my phone when I should be working

 

[psuiewalsh]

I'll be bringing the large mount 36" .063 3/8 lightweight that was pictured earlier.

 

[BigOakAdot]

I have a brand new 36" Windsor bar but really would like to max out my 36" Alaskan.

Showrguy are you offering to sell or just test drive it on my saw? I'm up for trades or just outright buying it if it's for sale.

Thanks all.

 

[BigOakAdot]

Here's a half ass pic of what I got to offer.

 

[showrguy]

I have a brand new 36" Windsor bar but really would like to max out my 36" Alaskan.

Showrguy are you offering to sell or just test drive it on my saw? I'm up for trades or just outright buying it if it's for sale.

Thanks all.

Naw, I would'nt want to sell it, I thought you might be looking to mount one up to see how she does...

 

[MGoBlue]

I'd like a large mount Husky 32" or longer bar if anyone has extra.

 

[redfin]

Blue, are you gonna bring your 610? It will give me something to look forward to build mine.

 

[psuiewalsh]

I'd like a large mount Husky 32" or longer bar if anyone has extra.

I think I have an adapter if you wanted to pick up one of the stihl bars to fit.

 

[BigOakAdot]

Appreciate it showrguy. May need to take you up on that offer my 076 has yet to see wood.

 

[MGoBlue]

Blue, are you gonna bring your 610? It will give me something to look forward to build mine.

Absolutely! Wagnerworks should have a bar and chain for me which will allow some cookie cuttin'.

I think I have an adapter if you wanted to pick up one of the stihl bars to fit.

Definitely an option I'd consider, thanks.

 

[psuiewalsh]

Ill tag it tonight

Sent from my C771 using Tapatalk 2