"2015 You Suck Thread"-Pictures required

[ramdad]

Pics or the 024 and 08 didnt happen raumati01, thems the rules. P.S nice score, upgrade the 08 to the concrete saw if you can get the parts, as a saw its tough but extremely slow and heavy, as a concrete saw it was more versatile. Just keep your eye on the bearing or the blade will wobble on the cuts. Enjoy

 

[PA Dan]

Yard sale on the way to pick my boys up from our church camp. Asked the guy what he knew about the saw. He said it starts and idles but stalls when you give it throttle. I asked if he could show me. It started on the third pull idled and stalled when he gave it throttle. He said ill take less so I ask whats your bottom dollar and he says ill go $12.00!

 

[Perry pioneer]

Yup You suck, nice. Find all the yard sales around here are baby clothes and crap. What's it going to take to make it run right adjust carb or rebuild. Man $12.00 sold.

 

[Jon1212]

View attachment 431512 View attachment 431513 Yard sale on the way to pick my boys up from our church camp. Asked the guy what he knew about the saw. He said it starts and idles but stalls when you give it throttle. I asked if he could show me. It started on the third pull idled and stalled when he gave it throttle. He said ill take less so I ask whats your bottom dollar and he says ill go $12.00!

Less than $0.20 per cc? Yeah you suck!

 

[Jon1212]

Good thing you only paid $12.00. It leaves plenty of margin to replace that Vanguard chain.

 

[PA Dan]

Good thing you only paid $12.00. It leaves plenty of margin to replace that Vanguard chain.

Problem solved I hope!

 

[Jon1212]

Problem solved I hope!

Depends which bar is on it. D176?

 

[PA Dan]

Right! Ill get more into it tomorrow!

 

[Jon1212]

Right! Ill get more into it tomorrow!

That bar should take 70dl. That being said, your 74cc's of fury 245A would rock and roll with a 24" bar.

 

[nstueve]

Freebie! She's a sweet runner. Think the carb is off a little though.

Sent from my iPhone using Tapatalk

 

[Toad22t]

Freebie! She's a sweet runner. Think the carb is off a little though.

Sent from my iPhone using Tapatalk

You gotta clear your throat before you make the noises and it will clear right up!

 

[raumati01]

Pics or the 024 and 08 didnt happen raumati01, thems the rules. P.S nice score, upgrade the 08 to the concrete saw if you can get the parts, as a saw its tough but extremely slow and heavy, as a concrete saw it was more versatile. Just keep your eye on the bearing or the blade will wobble on the cuts. Enjoy

Will post pics tomorrow, I have never seen parts available for a ts350 it only seems to turn up as a post hole borer but thanks for the tip. A guy I bought a pile of saws off a while ago sold me a husky 55, 61, and one and a half 266s along with two 034s on thursday, they turn up on july 2.
I bet the mrs is going to be stoked , I'm just about to sell a bunch of saws and she might have been worried the numbers were starting to get a bit low.

 

[bikemike]

That is not enough saw for you might as well send that hand numbing saw this direction

 

[B-N]

You gotta clear your throat before you make the noises and it will clear right up!

If you clear your throat it will run too lean for my liking.

A little bit of phlem will keep you 4 stroking nicely.

 

[cgraham1]

View attachment 431512 View attachment 431513 Yard sale on the way to pick my boys up from our church camp. Asked the guy what he knew about the saw. He said it starts and idles but stalls when you give it throttle. I asked if he could show me. It started on the third pull idled and stalled when he gave it throttle. He said ill take less so I ask whats your bottom dollar and he says ill go $12.00!

I had one that was all busted up, but after 20 years of sitting it fired right up and ran good. I ended up selling it for parts, but I'm sure I kept the carb off that saw... If you end up needing a carb, let me know.

 

[Jmbass]

View attachment 431695 View attachment 431696
Found this really nice 026 today, almost feel bad about what I got it for. Should make a nice little limb saw.

 

[bikemike]

Happy fathers day you suck

 

[PA Dan]

Yup You suck, nice. Find all the yard sales around here are baby clothes and crap. What's it going to take to make it run right adjust carb or rebuild. Man $12.00 sold.

Probably a carb kit! Ill try to get it running while I wait for the kit. Not sure if I had one so I ordered a couple. Cleaned it up a little last night and checked it all out. Looks pretty clean! Paint had oxidation but polished up real nice!

 

[Chris_In_VT]

View attachment 432228

Anyone see that 2171 on VT CL for $40?
I got it

Story was it was straight gassed early on and then ran on mix gas till it locked up. Clean low hour saw, I doubt it's had 10 tanks of fuel through it.
View attachment 420693

It's a bit dirty from storage but seriously low hours on this saw.

Tore into it and the jug actually looks fine. Very little transfer.
It's a shame, but the big end bearing tossed it's cookies
View attachment 420695 View attachment 420696

So not a total "you suck" deal but once I source a good crank and replace that, I'll have a cherry 2171

About time I got around to fixing this saw up
Does anyone have a Jonsered where the black paint on the handlebar hasn't chipped off? Seems like it's the husky clear\silver, it falls off if you look at it wrong.

 

[Ronaldo]

View attachment 432228
About time I got around to fixing this saw up
Does anyone have a Jonsered where the black paint on the handlebar hasn't chipped off? Seems like it's the husky clear\silver, it falls off if you look at it wrong.
View attachment 432224 View attachment 432225 View attachment 432226 View attachment 432227
View attachment 432230

Yea, the black paint is not very durable. That 2171 is in NICE shape!!