Splitter Axles

[WoodTick007]

That's too much farting around. My two places are 40 miles apart and I am not humping a 600# piece of steel on and off a trailer twice in a day.

Why don't you just buy two splitters? Place one at each location then you won't have to do all the humping.

 

[svk]

Why don't you just buy two splitters? Place one at each location then you won't have to do all the humping.

Care to loan me the extra grand?

 

[triptester]

If the splitter is a H/V type not much can be done to make it more high speed capable. The wheel base is narrow and the machine is top heavy. The bearings are probably already high speed . Increasing tire diameter might cushion the ride some but the larger tires would intrude even more into the already crowded work area. Also increasing tire diameter would keep the foot of the beam from touching the ground when in the upright position making it very unstable in use.

 

[svk]

DHT splitters have a second mount already drilled for those who wish to increase tire size. Apparently this is a common upgrade.

 

[robson1015]

I made mine from an old boat trailer - 14" tires, 2500 lb. axle.

 

[wndwlkr]

Care to loan me the extra grand?

whawhawha, ether cough up the money or quit crying. I build splitters that can be pulled faster than your car or truck will run! wake up.

 

[chucker]

whawhawha, ether cough up the money or quit crying. I build splitters that can be pulled faster than your car or truck will run! wake up.

that one would look real silly splitting wood vertically hey or unable! so you don't have all the answers to a few questions? lol

 

[Kevin in Ohio]

I guess it depends on what you want but I never cared for a suspension on a splitter. Causes too much rocking when lifting bigger pieces up for my taste. Check out old farm equipment too as a lot of times they can be had for cheap. May not be highway rated though. I used an old anhydrous tank running gear. Gave me flotation tires and a very strong axle.

 

[mesupra]

I've always thought it would be neat to make a swing out mount on the tongue of a trailer for a super split.

 

[JeffHK454]

All these threads with people worried about towing their splitters is nuts...seems like solution in search of a problem.

I've been pulling a SpeeCo convertable all over the place for years with no problems , and other than tossing a ratchet strap around the beam to quiet the rattling I take no special precautions or change my driving style in any way. I've got a spare set of wheel bearings in a ziplock bag in the glove box But have yet to need them. Like I've said in other splitter axle threads , the tires & bearings on my splitter are the same stuff that was on my dads boat trailer and it's been back and forth to Canada a dozen times with only routine maintenance.

 

[tla100]

If you have an automotive scrap yard around, look for a FWD rear straight axle, some of the minivan straight axles work too. Cheap replacement bearings and seals and should last for YEARS, usually have 14-15 rims too.

Or, I went to local farm/fleet store and bought the spindles and hubs, about $45 a side and welded on a 4x4, or 6x6 I forget, square tube that I capped. I only put the 10"? boat wheels and tires on, as I don't plan on pulling over 10-15 miles, tops. Pull 55-60 down highway no problem.

I also think it is crazy to have to trailer your splitter anywhere. On a snowmobile trailer I rebuilt last winter, it just had a U-channel maybe 2" tall x 1" wide, open at bottom.

 

[ChoppyChoppy]

I normally just tow the wood to the splitter. It's easier that way.

 

[NSMaple1]

I normally do the opposite - get it to easy to handle size as soon as possible. Usually split everything that has any size to it right where it landed when the tree fell. It's a situationally dependant thing though, usually.

 

[moondoggie]

I guess it depends on what you want but I never cared for a suspension on a splitter. Causes too much rocking when lifting bigger pieces up for my taste. Check out old farm equipment too as a lot of times they can be had for cheap. May not be highway rated though. I used an old anhydrous tank running gear. Gave me flotation tires and a very strong axle.

Nice!!!

 

[dancan]

Splitfire and a few other companies make some with a highway tow package so no need to go through the bs of modding a new splitter to turn it into a trailer .
Or , just make it a spot in your trailer , split and stack , self contained LOL

 

[Cody]

Splitfire and a few other companies make some with a highway tow package so no need to go through the bs of modding a new splitter to turn it into a trailer .
Or , just make it a spot in your trailer , split and stack , self contained LOL

I've always had the idea of building a splitter that mounts right into a receiver hitch. Put the splits right into the back of the truck. Maybe somebody can put more thought into it than I. Maybe someday when I have a dedicated wood truck...

 

[olyman]

svk,,,as tla100 said,,axle of rear of fwd..go to a Chrysler/dodge mid size van.. cut it down,,and reweld as necessary. tons around,,and cheap....

 

[dancan]

Get a real trailer axle, can't be more than 80$ish down there , hubs and bearings are cheap and all standard size when it comes time for service , trailer tires and rims are standard as well .
Much easier to fix years down the road .