Yea it will make it a little bit louder but it will help let it run coolerThanks for the replys!
Does anyone have detailed pics of a 660 muffler mod? or should I just buy the dual port cover? I've seen where guys just rip the baffle box out...does it make it ungodly loud?
Do the HO oilers wear out fast? Should I buy an extra, if I'm doing milling?
You guys have any recommendations on chain spinners? I saw the harbor freight one frequently need to be tweaked before it works right...anyone have a better option that is in the price range?
Thanks again!
Thanks for the replys!
Does anyone have detailed pics of a 660 muffler mod? or should I just buy the dual port cover? I've seen where guys just rip the baffle box out...does it make it ungodly loud?
Do the HO oilers wear out fast? Should I buy an extra, if I'm doing milling?
You guys have any recommendations on chain spinners? I saw the harbor freight one frequently need to be tweaked before it works right...anyone have a better option that is in the price range?
Thanks again!
Yes it will make it a little bit louder but it will help it run a little bit cooler. I made mine a tryport and heres some picksThanks for the replys!
Does anyone have detailed pics of a 660 muffler mod? or should I just buy the dual port cover? I've seen where guys just rip the baffle box out...does it make it ungodly loud?
Do the HO oilers wear out fast? Should I buy an extra, if I'm doing milling?
You guys have any recommendations on chain spinners? I saw the harbor freight one frequently need to be tweaked before it works right...anyone have a better option that is in the price range?
Thanks again!
But note this I've done some porting on my cylinder and not sure if you going to with yours you can just open up the outlets that are on the muffler that you have and on the baffle just cut off the front off the baffle with a dremil that should be good enough if your just looking for a little more power. It helps a little bit but you will need to change your jet in your carb if you let that saw breath more. Witch me and Bedford T would recommend ether way.Thanks for the replys!
Does anyone have detailed pics of a 660 muffler mod? or should I just buy the dual port cover? I've seen where guys just rip the baffle box out...does it make it ungodly loud?
Do the HO oilers wear out fast? Should I buy an extra, if I'm doing milling?
You guys have any recommendations on chain spinners? I saw the harbor freight one frequently need to be tweaked before it works right...anyone have a better option that is in the price range?
Thanks again!
That's not a kit muffler is it?But note this I've done some porting on my cylinder and not sure if you going to with yours you can just open up the outlets that are on the muffler that you have and on the baffle just cut off the front off the baffle with a dremil that should be good enough if your just looking for a little more power. It helps a little bit but you will need to change your jet in your carb if you let that saw breath more. Witch me and Bedford T would recommend ether way.
Nope i do like changing things up a little bit.That's not a kit muffler is it?
The mufflermOk cool...I'll just widen the muffler by the cylinder exhaust port then.
How much oil does the HO oiler put out? I don't have the saw together, but when I do, just wondering what I should be looking for to make sure its functioning right. Does it throw chain oil off quite a bit?
Looks like a farmertec kitIs this kit on eBay the hutzl farmertec kit? Ready to order. No ones answering the phone at HL supply. I tried to call and see if they will offer a coupon code or deal on the ms660 kit anytime soon. I also emailed 4 days ago no reply. So looking elsewhere. This one is on ebay. Is it the farmertec?View attachment 634550 View attachment 634551 View attachment 634552 View attachment 634553
Yes it will make it a little bit louder but it will help it run a little bit cooler. I made mine a tryport and heres some picks
The muffler is already modded in the kit. The oiler had a few duds. Not on mine but another guy. At that price my suggestion was order two. I guess I should have said why two. I will allow others to pick up here....
Thank you it sounds a little different to a few of my friends have oem ms660s with the oem dual port mufflers and mine sounds different from theres and thats what I was going for .Nice job. I may have to try that.
It's Chinese new year... check back next week, they take a week or two offIs this kit on eBay the hutzl farmertec kit? Ready to order. No ones answering the phone at HL supply. I tried to call and see if they will offer a coupon code or deal on the ms660 kit anytime soon. I also emailed 4 days ago no reply. So looking elsewhere. This one is on ebay. Is it the farmertec?View attachment 634550 View attachment 634551 View attachment 634552 View attachment 634553
Does duel Port mean holes on both sides, like this? Mine only has holes on one side? Although there is one in the cover and one in the baseYea it will make it a little bit louder but it will help let it run cooler
Yes it will make it a little bit louder but it will help it run a little bit cooler. I made mine a tryport and heres some picks View attachment 634501 View attachment 634502
The one you have is considered a dual port but it doesn't flow as much as the factory one but if add a third one it will but if you do put a third outlet in id start with a small hole like 1/4in and then see how you like it. Like I said I ported my cylinder so my saw like to breathe. Lol.Does duel Port mean holes on both sides, like this? Mine only has holes on one side? Although there is one in the cover and one in the base
Yes sir that is farmertec, they do business as huztl and machine doctor and a couple more on ebayIs this kit on eBay the hutzl farmertec kit? Ready to order. No ones answering the phone at HL supply. I tried to call and see if they will offer a coupon code or deal on the ms660 kit anytime soon. I also emailed 4 days ago no reply. So looking elsewhere. This one is on ebay. Is it the farmertec?View attachment 634550 View attachment 634551 View attachment 634552 View attachment 634553
That was clear enough, nice infoWell Bedford T im still having trouble with the video so I just did some picks for you. View attachment 634591 View attachment 634592 View attachment 634593 View attachment 634594 View attachment 634595
Enter your email address to join: