HL Supply carries aftermarket Husky screws and I have been happy with them. Just watch your lengths.
You can become a Supporting Member which comes with a decal or just click here to donate.
I was going to suggest them but after shipping you will end up paying the same price that the OP does not want to pay.HL Supply carries aftermarket Husky screws and I have been happy with them. Just watch your lengths.
Yes and I believe the lowest is still $2.99 so like I said.......not much of a savings. I like Bruce and HL and spent $5000 with them recently. They still will not save the OP much if anyI order them along with other things...
What are the exact measurements of them?Anybody have an alternatives for replacement screws on 365/372 recoil attachment/fasteners?
Omg is husky proud of those...anywhere from $3 to $6 a piece.
$24 for 4 screws seems to warrent a "post"
503 20 43-19 is the PN I found so far
I'd bet they eliminated that full threaded screw so when they are run loose the treads don't chew out the plastic as fast. Just an observation on my part nothing more.Every Husqvarna screw that's M5 x 0.8 is a M4 head, and Husky 2100 recoil screws are threaded all the way up.
Somewhat of a "captured" screw too..you gotta kinda tug through it to get the screw out.I'd bet they eliminated that full threaded screw so when they are run loose the treads don't chew out the plastic as fast. Just an observation on my part nothing more.
Ding ding ding....we have a winner....just gotta get over that shipping thingThey thread thru the cover and onto the unthreaded shank so they stay with the cover.
Aftermarket are less than $1 each.
https://www.hlsproparts.com/searchresults.asp?Search=husqvarna+non+genuine+screw&Submit=
Hence what I said in an earlier post. I buy from H and L and like them but I also support my local hardware stores that are mom an pops and have full serviceDing ding ding....we have a winner....just gotta get over that shipping thing
Especially if you don’t want to wait for an order to arrive - local store is instant gratificationHence what I said in an earlier post. I buy from H and L and like them but I also support my local hardware stores that are mom an pops and have full service
100% true....100% true Especially if the counter girl is a sweet looking older gal....Especially if you don’t want to wait for an order to arrive - local store is instant gratification
Your best bet is to look at the link in post #27 above. Pull up the IPL and get the correct part number, then call H and LNeed 1 Muffler #25 torx/ flat driver machine screw for early 262xp muffler with 4 of these hard to find bastards that hold the front plate to the muffler. The body of the muffler has two long fasteners going into the exhaust port all good there. This fastener is only a 1/2 inch long. The bottom of this plate uses two fasteners into the front of the saw body. Take off this plate and you have a hollow muffler, Nothing in there, no guts of any kind.. You can inspect piston and bore. Mine looks like fuc%$ng new by the way. Please help. I live 5 mins from a place that has every bolt known to man. Getting one that will work is easy. Looking for an OEM that matches. Thanks for reading my madness OCD post. I forgot to say please.
Need 1 Muffler #25 torx/ flat driver machine screw for early 262xp muffler with 4 of these hard to find bastards that hold the front plate to the muffler. The body of the muffler has two long fasteners going into the exhaust port all good there. This fastener is only a 1/2 inch long. The bottom of this plate uses two fasteners into the front of the saw body. Take off this plate and you have a hollow muffler, Nothing in there, no guts of any kind.. You can inspect piston and bore. Mine looks like fuc%$ng new by the way. Please help. I live 5 mins from a place that has every bolt known to man. Getting one that will work is easy. Looking for an OEM that matches. Thanks for reading my madness OCD post. I forgot to say please.
Enter your email address to join: