backofbeyond
ArboristSite Lurker
I recently installed a used adjustable oiler on my 026 and posted pictures of the old plastic pump and the new adjustable in a previous thread. Upon getting the saw back together I ran it without the bar to see if the little out put hose had any coming out and it did. When i reinstalled the bar and chain i never got any to come off the end of the bar. The under teeth on the chain had a generous amount on them and unfortunately the clutch cover had to much excess oil dripping from it. Its a rollomatic bar with an oregon chain with #20 on the under teeth and 25 on the top teeth. The chain has holes in the under teeth every 2 or 3 teeth. It appears to be carrying the oil all the way around and dumping it in the rear cover. I use polan pro bar oil. Is this normal not to throw oil off the end of the bar?
