Yep. The plug holes can be repaired... @srcarr52 can weld them up and re-thread them.View attachment 660963 View attachment 660964 View attachment 660965 View attachment 660961 View attachment 660962 Hi all,got 2 064 cylinders today for $20.
Both have damaged plug threads but no scoring/marks at all.
Was this a good buy.
OH yes you stole them cylinders.View attachment 660963 View attachment 660964 View attachment 660965 View attachment 660961 View attachment 660962 Hi all,got 2 064 cylinders today for $20.
Both have damaged plug threads but no scoring/marks at all.
Was this a good buy.
Well I've got a spare one for mine and if were to sell it I wouldn't let it go for less than $60 but I rarely ever see them up for sale and they are getting scarce here big time so I might be light on my number. Lol.Hi mg,what would an 064 cylinder go for in your neck of the woods?With a good plug thread of course.
Not that I am going to sell!
That's good to know the value of the spare that I've got just gon up. LolI see them go for $100 US, or more.
In that area might get to hot but you could use lock tight.Just a thought on the key serts.Wouldn't the key slots cause an air leak???
Could a little JB put in them or is this not heat proof enough?
I think I read about the JB heat issue somewhere but not sure.
Cheers,Chris.
The loctite I have seen is rated to 400 degrees,would this be high enough?In that area might get to hot but you could use lock tight.
I think that will be OK I use blue lock tight on all my D compression valve plugs they don't leak and never come loose ever. So I'm guessing the lock tight you have is the red?The loctite I have seen is rated to 400 degrees,would this be high enough?
LolJb weld in transfers is fine as well. Just
mill that chamber off and have a head and a pipe built for it
Hi mg,don't have any yet just looking what's available,will have a look at the blue also.I think that will be OK I use blue lock tight on all my D compression valve plugs they don't leak and never come loose ever. So I'm guessing the lock tight you have is the red?
Your very welcome.Hi mg,don't have any yet just looking what's available,will have a look at the blue also.
Cheers,Chris.
BTW,thanks for everyone's input to this thread.
Enter your email address to join: