Sold 266xp 272 xp conversion project

[Manugoss]

Husqvarna 266xp with 272 xp piston and cylinder. The project is not finished. OEM used piston and cylinder. 160 psi, new crank bearing. I worked on this project 4-5 years ago but was never able not get running it well. Would start but would not run. I believe the impulse hole in the gasket does not line up correctly. 20'' bar and chain included.

The minus:

- Crack in the top cover
- Fuel hose is to be changed
- missing 2 cover bolts
- front cover thread is damaged, See pictures. Might be the worst one
- spark arestor on the muffler is missing

Everything else should work.

175USD + shipping or submit your offer, it must go, the wife says that I have too many unfinished projetcs....

 

[chipper1]

@Czed

 

[neely]

Husqvarna 266xp with 272 xp piston and cylinder. The project is not finished. OEM used piston and cylinder. 160 psi, new crank bearing. I worked on this project 4-5 years ago but was never able not get running it well. Would start but would not run. I believe the impulse hole in the gasket does not line up correctly. 20'' bar and chain included.

The minus:

- Crack in the top cover
- Fuel hose is to be changed
- missing 2 cover bolts
- front cover thread is damaged, See pictures. Might be the worst one
- spark arestor on the muffler is missing

Everything else should work.

175USD + shipping or submit your offer, it must go, the wife says that I have too many unfinished projetcs....

Shipping quote to 75116

 

[Manugoss]

Anybody interested? How about free shipping ? Make me an offer with or without the bar and chain.

 

[Manugoss]

I think that I will give another try at fixing it.