MS460WOODCHUCK
Addicted to ArboristSite
I run 40:1 full synthetic in all my saws (mostly newer stihls).
I have a guy who is the mechanic in a saw shop telling me I will burn up my rings from running it to rich that I should run 50:1. That he has seen 7 460's and 3 660's already this year come in with toasted top ends from 40:1 running to rich and building up carbon in the exhaust port and the carbon ending up back in the top end.
He also told me that running 40:1 makes your saw run hotter than 50:1 because the oil burns hotter that the fuel.
I've opened my mufflers up and have seen no sign of carbon but I've only ran about 10 gallons since switching from 50:1 to 40:1.
I'm not looking to get flamed for a oil thread but this really has me thinking does 40:1 make my saws run hotter than 50:1? Should I be running at 50:1? Has anybody that works on saws daily seen any problems with 40:1 like he's saying?![Dizzy :dizzy: :dizzy:](/styles/default/xenforo/dizzy.gif)
I have a guy who is the mechanic in a saw shop telling me I will burn up my rings from running it to rich that I should run 50:1. That he has seen 7 460's and 3 660's already this year come in with toasted top ends from 40:1 running to rich and building up carbon in the exhaust port and the carbon ending up back in the top end.
He also told me that running 40:1 makes your saw run hotter than 50:1 because the oil burns hotter that the fuel.
I've opened my mufflers up and have seen no sign of carbon but I've only ran about 10 gallons since switching from 50:1 to 40:1.
I'm not looking to get flamed for a oil thread but this really has me thinking does 40:1 make my saws run hotter than 50:1? Should I be running at 50:1? Has anybody that works on saws daily seen any problems with 40:1 like he's saying?
![Dizzy :dizzy: :dizzy:](/styles/default/xenforo/dizzy.gif)