redbull660
Addicted to ArboristSite
also tested these two with a 41" bar. Again please remember these are two different model saws ported by two different porters.
41" Stihl Bar (2) New Stihl .404 RSLF Chains. 7pin sprocket. In hindsight I wish I had done the test with 8pin sprocket.
Here is my muff modded 661 running the same .404 yes .404 RSLF chain as the 084 and 880 with the same 7pin sprocket. Obviously different bar. I get almost through on 1st cut, but cut out near bottom, at about 1:08. So then I decided to just do another cut that ended up being 1:12.
41" Stihl Bar (2) New Stihl .404 RSLF Chains. 7pin sprocket. In hindsight I wish I had done the test with 8pin sprocket.
Here is my muff modded 661 running the same .404 yes .404 RSLF chain as the 084 and 880 with the same 7pin sprocket. Obviously different bar. I get almost through on 1st cut, but cut out near bottom, at about 1:08. So then I decided to just do another cut that ended up being 1:12.