Want to Buy 70-80cc saw

[derrek_j]

Looking for a saw in the 70cc to 80cc range. Looking for something along the lines of a Dolmar 7900, Husqvarna 390xp, 385xp, 372xp or similiar, and would really like a ported saw, especially a 372 or 7900. Missed a few on here lately. Would like to be set up with a cap of $500ish, powerhead and bar. So $400 ish pho shipped is around my max. Would budge a little for heated handle.

Top 2 choices would be ported 372xp or ported 7900.

Thanks everybody

 

[Toad22t]

Looking for a saw in the 70cc to 80cc range. Looking for something along the lines of a Dolmar 7900, Husqvarna 390xp, 385xp, 372xp or similiar, and would really like a ported saw, especially a 372 or 7900. Missed a few on here lately. Would like to be set up with a cap of $500ish, powerhead and bar. So $400 ish pho shipped is around my max. Would budge a little for heated handle.

Top 2 choices would be ported 372xp or ported 7900.

Thanks everybody

I have a ported Stihl 460 Arctic(heated handle version) for sale. I can move a little bit on my price listed but stillay be over your price range.

 

[derrek_j]

Ya i did see that, just out of my budget at this time. Thanks though

 

[chipper1]

Looking for a saw in the 70cc to 80cc range. Looking for something along the lines of a Dolmar 7900, Husqvarna 390xp, 385xp, 372xp or similiar, and would really like a ported saw, especially a 372 or 7900. Missed a few on here lately. Would like to be set up with a cap of $500ish, powerhead and bar. So $400 ish pho shipped is around my max. Would budge a little for heated handle.

Top 2 choices would be ported 372xp or ported 7900.

Thanks everybody

Welcome to AS derrek.
I don't have anything in that price range right now, sorry.
But someone may have something come up soon.
Good luck with your search.

 

[Toad22t]

I do know where a ported 2165 is for sale for $400. I'm not sure if the builder has it listed on this site or not. @mdavlee

 

[Toad22t]

What part of Wisconsin are you from @derrek_j ?

 

[cgraham1]

Mike Lee is the only one around here who sells ported saws for non-ported saw prices. A ported 7900 or 372xp is typically $7-800 plus shipping.

I will sell you a decent condition stock 2165 for $400 plus shipping. For an extra $50 I will throw in a 372xp cylinder. Then you can save up the $300 plus shipping and have it ported later.

 

[Toad22t]

And Mike Lee is a top notch builder also. I can't justify selling my saw's for that. I would never be able to replace them for that.

 

[derrek_j]

I have a ported Stihl 460 Arctic(heated handle version) for sale. I can move a little bit on my price listed but stillay be over your price range.

What part of Wisconsin are you from @derrek_j ?

About 30 miles east of lacrosse

 

[Toad22t]

So Tomah area?

 

[derrek_j]

Ya, pretty close. Live outside of cashton

 

[Toad22t]

Ah ok! I work in New Lisbon and live about 30 miles east of Tomah.

 

[cgraham1]

Go to AboristSite and check the classifieds for Mike's ported 2165. $400 plus shipping and he just put a new piston in it.

 

[kyle121990]

I have a husqvarna 365 a little smaller than you might want it's a 65cc saw that I could sell. I actually live near lacrosse so we could meet if you were interested.

 

[SOS Ridgerider]

I have a Husqvarna 576XP non A/T with 24" bar and chain. Saw is in good shape. I'd let that go for $500 shipped. PM me for photos if you're interested.

 

[MillerModSaws]

@fin460 may have something but not sure it's gonna be in that price range. I've got both of the saws your after but not in that price range. Good luck buddy. The @mdavlee saw is the best option I see so far.

 

[mdavlee]

The 2165 isn't perfect but it's a good running saw. It's on a 2172 case if I remember right. I've got about 6 more bottom ends from the 365/2165/372/2172 family laying around. The ported cylinder I think is the one with a couple fins broken on top. I've got a pile of them but that's the first one I slapped together and ported.

 

[cgraham1]

The 2165 isn't perfect but it's a good running saw. It's on a 2172 case if I remember right. I've got about 6 more bottom ends from the 365/2165/372/2172 family laying around. The ported cylinder I think is the one with a couple fins broken on top. I've got a pile of them but that's the first one I slapped together and ported.

Does it have the x-torque carb, Mike?

 

[derrek_j]

@mdavlee just pmd you on the site your saw is listed on

 

[mdavlee]

Does it have the x-torque carb, Mike?

Nope. That one doesn't.