Dose anyone make a replacement .050/3/8 chain that will fit the Echo CS 3510. I plan to buy one of these saws but would a more aggressive chain than the OEM.
Safety chain is junk. If you buy your Echo CS-3510 from a full-service outdoor power equipment shop (not a box store), they will put Oregon 91VXL non-safety chain on it.Dose anyone make a replacement .050/3/8 chain that will fit the Echo CS 3510. I plan to buy one of these saws but would a more aggressive chain than the OEM.
These work really good. Carlton N1C chains cut good so do the Oregon 90vlx. The Carlton will keep it's edge better in dirty wood.Stihl PS and PS3 seem to be the fastest cutting 3/8 low profile 0.050 chains. They work great on my 36cc Echo.
Do you really need 57 drive links? 56 works well on my 361p. Actually that bar seems to lay exactly over another that calls for 56 though Echo comes with and calls for 57.This is what I put on mine:
https://www.amazon.com/gp/product/B00439EJCO/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
I just went with what the chart called for. I've seen guys say 56 on here but I put on what the chart called for and it works fine so I'm happy. I have two chains I alternate between and keep them sharp, it's pretty impressive what that little saw will do with this chain. I find myself using it more and more for things I normally would have grabbed my Stihl MS462 for.Do you really need 57 drive links? 56 works well on my 361p. Actually that bar seems to lay exactly over another that calls for 56 though Echo comes with and calls for 57.
Does the cs 3510 use a Rim drive or Spur?Safety chain is junk. If you buy your Echo CS-3510 from a full-service outdoor power equipment shop (not a box store), they will put Oregon 91VXL non-safety chain on it.
Thanks. I've not seen a cs 3510 but like the cs352. Last night I put a 14 inch bar n chain on mine down from 18. Got some limbs. I sure don't like Spur sprockets. First thing I did on my Sthil 029 was mm mod, change spur to 3/8 rim. Woke that saw up. It's 54 cc (i think) but cuts like a bigger saw. No comparison to the 50cc 026. Have a great day.CS-3510 uses a spur sprocket.
Enter your email address to join: