dozerdan
Addicted to ArboristSite
It looks like the weakest point will be at were the 1/2" to 1" transition is. Can you bore out the love joy to 5/8 or 3/4 and then broach it?
Just make the darn thing.
Try your local scrap yard, look for an axle from a rear wheel drive vehicle. That will give you plenty of material to work with. If you screw the first one up, no big deal, just try it again.
This is almost as good as an oil or flippy cap thread.
Later
Dan
Just make the darn thing.
Try your local scrap yard, look for an axle from a rear wheel drive vehicle. That will give you plenty of material to work with. If you screw the first one up, no big deal, just try it again.
This is almost as good as an oil or flippy cap thread.
Later
Dan