What measurements I have a fair amount. The are usually 5mm x what length?
Anyone order direct from Farmertec? Shipping is nuts
- Thread starter Bill G
- Start date
Help Support Arborist Forum:
I was going to order 10-20 of each size in 4mm,5mm,and 6mm. I was going to be about 200 screws plause other small parts
The big let down with Chinese screw copies (besides the often imperfect T27 drive slots), is they do not have the knurling on the underside of the head to bite into cases and retain their position- the smooth head version tends to fall out just like Husqvarna bolts.
If it does not worry you the specific drive- look on Amazon or the like for multi packs of hex drive cap screws- often cheap, multi length and sometimes multi diameter as well.
Order the common sizes that you normally use. I would order 50 ea size them the way things are going
link
Gone fishing
They hold their promises as far as delivering mostly, I prefer them to aliexpress.
I am not worried about the delivery I am worried about the cost.
Nothing local for you like a fastenal?
Even home improvement centers generally have a pretty good sorty of metric hardware.
Even home improvement centers generally have a pretty good sorty of metric hardware.
That shipping just seems wrong . Try again.
I thought that I had seen where Duke Thieroff had put together kits of metric T27 drive screws with the serrations on the underside of the head they seemed reasonably priced at that time, ,Traverse Creek Saw Supplies, maybe worth contacting him.
The only way you'll gain experience is by doing and keeping records of the good and bad vendors. Like on ebay they have a history of purchases that you can check out. I don't know about Amazon as I've never dealt with them..
I have put together several orders for Farmertec, mainly hardware items since they have such an interesting assortment and attractive per piece pricing. I have never actually placed the orders due to shipping costs, either find what I need elsewhere, make do with what I have, or find a suitable substitute.
Mark
Mark
Yawl must have Huskie saws to need all those screws lol
I paid $5.84 for an FS250 control handle from Famertec. Shipping was $9.31 before a $1 discount. The part arrived in a few weeks. I could have gotten something for about the same total on eBay but wasn't sure what brand it would be.
I am sure going to give it another try. I have no issues paying fair prices. I do have issues with back-door charges. It is not quite a "bait and switch" but gosh darn close.
I am open to anything especially supporting a good guy here.
That is the exact problem. I spent a lot of time putting an order together. I actually started the order and wrote it all down in my notebook while I was laying in the hospital for almost three weeks last month. I was board as heck and had to do something. The other night I go to finish and pay then whammmo
No all the screws I was ordering were for Stihl's.
Yes there is a Fastenal within12 miles. I se them for shipping of pallets of saws and tools. I will be in there after Christmas picking up a pallet of saw items from a great member here. They do not sell anything close to the correct T-27 screws. They have black oxide socket heads which are decent for the West Bend engines and some older Husqvarna saws. They do not have T-27 head screws. They can have them made but when I asked about it many years ago they quoted a price that would curl a man's toes. As for a home improvement center they have nothing close.
sawfarmer
ArboristSite Member
You can get hardware kits for the popular model saws.I think they are called spare parts kits. They have all the hardware etc in a plastic storage case .Check into it.
