old-cat
Fir Man
GREAT! Now how do I get it to save in my stinkin computer thingAs long as it doesn't have a bad check valve, or a worn out/stuck accel pump........then yeah.
GREAT! Now how do I get it to save in my stinkin computer thingAs long as it doesn't have a bad check valve, or a worn out/stuck accel pump........then yeah.
According to Scott's video, it seems TOO simple!So fix a hda199?
My carb had the correct diaphragm and still didn't run correctly. So I drilled a hole on the carb cover like the video said. That fixed the issue for me.
Here's a link with some discussion on the hda199.
http://www.arboristsite.com/community/threads/walbro-hda199-repair.251858/
Looks like you have new decals there Randy for the cowls
You know you can if you use Firefox as your web browser. If you do, you just need to download a free plugin to the Firefox browser.GREAT! Now how do I get it to save in my stinkin computer thing
That's a good idea I thought some of the decals where a little wonky thanks for the clarificationWhat we have is a new labeling system. We but the owner's name on that tape, their initials on the saw, and the jug. Then when we package the unit for shipping, we just pull that tape off and stick it on the box. No mix ups that way.......
What we have is a new labeling system. We but the owner's name on that tape, their initials on the saw, and the jug. Then when we package the unit for shipping, we just pull that tape off and stick it on the box. No mix ups that way.......
Well, this guy came and got his good saw and left me his crapy old Jonsered 625 II. I'll have to completely rip it apart and clean it then make it run. I don't know squat about this thing and no manual to fall back on!Well I had a Jonsered 2065 on my bench for a few minutes. My customer said it wasn't running right, like maybe the gas line had e10'd away or something.
I opened it all up, ripped the carb apart, everything was clean and perfect. The gas line looked like it might have been kinked just a tad, so I untwisted the line 1/2 turn, fired it up, cut some wood, PERFECTO!
I told him his saw was junk, that he needed to leave it with me and go buy a new saw!
Welp......them MS261s are done.
Moving onto the MS460s tomorrow.
Enter your email address to join: