Shouldn't slow anything down if you sell on the cut your adding heat the longer the wheel contacts the hotter it gets.. think of a grinding wheel like a mill cutter its still cutting the material only the chips are smaller and the cutting edge dulls and breaks away to a new sharp one ..... The dust or swarf or whatever you want to call. It should look just like chips off a mill if you magnify it. The cool stick is like a sacrificial heat sink.... I always just keep the wheel dressed. Nice and clean and don't take a aggressive cut...... Files don't make near as much heat [emoji12]Philbert, I see you already liked my post. I haven't forgotten you wanted a good review of all the chain grinders that I have at my disposal. So far I will have the following in my review thread.
Stihl USG
511a
511ax
551462 Oregon (hydro lock ax)
Silvey 300
Silvey 510
NT 511a knock off
Eventually I'll probably be able to add the Foley Belsaw chainsaw chain sharp-all attachment and the MAXX grinder. I also picked up a stick of G-440 Kool-Grind badged with the Granberg name. It's a wax based grinding wheel lube. Never used it but supposed to work on 90% of all grinding applications to keep the grind cooler so you don't detemper the metal. The question is will it slow the grind and take longer...
Anyway stay tuned... Hope to have it up over Christmas.
I can try and check whether it's awailable.I would make sure that you came out ahead !
Can you get the coil ?
Thats the only piece of the puzzle that hasnt been overcome
Part number is
1144 400 1301
It most likely will slow down the grinding process....I also picked up a stick of G-440 Kool-Grind badged with the Granberg name. It's a wax based grinding wheel lube. Never used it but supposed to work on 90% of all grinding applications to keep the grind cooler so you don't detemper the metal. The question is will it slow the grind and take longer...
That is unreal.
StihlsawingO and here's another surprise. And I gotta give props to homelite410 for letting me use his idea. Thanks bud. This one is going out to a lucky winner as lottery style. If you will actually use the knife post your name in the thread as you would in homelite410's lottery and my son or daughter will draw the winner from a hat on December 24th. Merry Christmas and good luck brothers. This is in Christmas thread because computer is down and had to use my phone but couldn't figure out how to do a link. Maybe someone could help and change it. If need be. View attachment 470963View attachment 470964View attachment 470965
How far would it be to just go through an unmanned crossing? I have heard they exist but I dont know never been within a few hundred miles of canada?This situation regarding Canada/USA crossings is interesting. I hesitate to go to Canada for recreation because of all the hassles I've had going into Canada. Vehicle searches on most entries, lots of questions and same questions asked 8 different ways, etc. I do a lot of international travel and rarely get grilled as thoroughly as I do when entering Canada. So I basically avoid the place and spend my money elsewhere.
I agree. When I took some hotdogs into Canada, no problem but on the way out I had to throw them away. SAME ONES!I think it varies by location.
Up here you can take anything into Canada except dog food and potatoes. On the way back the US guards treat everyone like criminals.
We used to have them in Minnesota - self-report at the Boundary Waters Canoe Wilderness Area.How far would it be to just go through an unmanned crossing?
. . . I took some hotdogs into Canada, no problem but on the way out I had to throw them away.
I just shipped a saw to Canada last week . they asked all kinds of questions for customs and taxes .All saws and parts have to go through customs, guess they check them for contraband and then access their value and set the fees associated with them crossing the border.
Ok I dont get it did I do it wrong? Did I rear it wrong is à knife no available? I'm the slow kid I guessFail!
Philbert
Gotta go to that thread:Ok I dont get it did I do it wrong? Did I rear it wrong is à knife no available? I'm the slow kid I guess
Enter your email address to join: