what prices are theese manThe 555 can be bought for $500 and the 562 for $600, PHO.
husqvarna 562 xp at
germany= 1200 euro
italy=1160 euro
holland= 1120 euro
sweeden= 1100 euro
greece =1000 euro
what prices are theese manThe 555 can be bought for $500 and the 562 for $600, PHO.
Sure, with $65 for shipping. Kidding of course, but this saw run great, needs nothing and I just put a new B&C on last year for $50.no but i got one sitting on my bench farmer dug it out of his barn and brought it to me to see if i can get it running i cant even find seals and the piston and cylinder are smoked
ill give you 45 dollars for the 610 if the saw is still in decent shape
here most dealers dont have the proper simple tools, for clue to the mtronic and autotunes, no coment, i dont know how the stihl and husqvarna give to them authorized service, I shame to tell this but my stihl dealer in my town when he must service mtronic he came and take my MDG1, i am a hobbiest, he is dealer, tell you something?And there's the biggest problem. Most dealers have no clue with the AT saws.
no doubt and scary. i like the auto tune, havnt messed much with MDG1 mtronic yet but its on my todo list when i find somone up this way that has one and will let me look over there shoulder or play with it for a few. stores around me sell stihl and husqvarna under the same roof and they are selling the auto tune 455 fa and the 500 series for the husky, and the stihl mtronic as well but i know they dont have the auto tune i keep getting those guys in here with a problem ive acutally only seen maybe 2 autotune problems the rest have been just wear and tear breakdowns auto tunes are sweet and i here the same and see the same from stihl i dont really have to mess with the mtronic eitherhere most dealers dont have the proper simple tools, for clue to the mtronic and autotunes, no coment, i dont know how the stihl and husqvarna give to them authorized service, I shame to tell this but my stihl dealer in my town when he must service mtronic he came and take my MDG1, i am a hobbiest, he is dealer, tell you something?
Not all carbs are bad. If it runs fine no need to worry. Mine is supposed to have a EL44 and had no issues.my 562xp is awsome i like it lot and cuts great it has the EL46 carburetor on it and runs flawlessly. did i miss the a update service bulletin or somthing and i just did a software update to it like a year or so ago. and like i said never a problem runs top notch
when did the EL46 start having issues i was aware of the EL44, but i didnt hear anything on the EL46 OR EL48 carburetors
+1, I know very little about these saws, but would do exactly this!!Put it this way, when I called Husqvarna about the EL46 carb issues they said I need to take it to my dealer and have the carb adjusted.
Me personally, if my dealer didnt know how to pop the top cover and verify 2 numbers I surly wouldn't buy a saw from them... especially one with Autotune!
Buy one from Terry (tlandrum) and be done with it.
I'd just buy one with the el48 from Terry Landrum
what prices are theese man
husqvarna 562 xp at
germany= 1200 euro
italy=1160 euro
holland= 1120 euro
sweeden= 1100 euro
greece =1000 euro
Pix coming tomorrow.Pics required.
My impression as well, I think Terry said he had replaced 6 carbs, which is the highest number I have heard, but that was saws from all over the US, not just saws that he had sold.Not all carbs are bad. If it runs fine no need to worry. Mine is supposed to have a EL44 and had no issues.
= much more expensive than in the US, where chainsaws are almost free!
what prices are theese man
husqvarna 562 xp at
germany= 1200 euro
italy=1160 euro
holland= 1120 euro
sweeden= 1100 euro
greece =1000 euro
Strange thing is one of the Husky dealers I contacted this week is still selling 562's with el44 carbs!My impression as well, I think Terry said he had replaced 6 carbs, which is the highest number I have heard, but that was saws from all over the US, not just saws that he had sold.
Likely saws still in the pipe line and dealer shelves with all three carbs.Strange thing is one of the Husky dealers I contacted this week is still selling 562's with el44 carbs!
So glad you guys told me to check first!Likely saws still in the pipe line and dealer shelves with all three carbs.
Proud owner of a new 562XP today, and yes it has an el48 carb. Can't wait to try it.
Strange thing is one of the Husky dealers I contacted this week is still selling 562's with el44 carbs!
Likely saws still in the pipe line and dealer shelves with all three carbs.
Enter your email address to join: