Gravely 27 ton log splitter

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I just bought a Gravely 34 ton last year and have been very impressed with the machine. I was in the same boat you are and rented an Iron and Oak 27 ton unit 3 or 4 times before I made the leap to purchasing my own. I seriously looked at the Iron and Oak brand and the rental units were always very stout and well built machines. The only issues I had with them were how big and heavy they were (never questioned why though since they were a commercial splitter), and once in a while some bark and splinters would get jammed under the wedge just right to bind it up and I would have to stop what I was doing to remedy the problem. I was going to purchase the 27 ton Gravely but the dealership was out of them currently and I had money in my pocket burning a hole so I made a deal on the 34 ton. Its probably more than I need but so far there is only 1 piece of wood I had that it couldn't split. That was a 24" piece of Ash crotch that had about 3 or 4 branches twisted and growing through it. I sheared off the outside then went right through the middle and it hung up to the point I had to knock the wood off with my maul. I tossed that one in the fire pit pile and went on my way splitting hedge, oak and hickory that day. I have probably only sent 4-5 cords through the Gravely but love it so far. I know there are a lot of other machines out there but I have a dealer .6 miles down the road from me so that weighed heavily on my decision. I do like this unit for how light it is and it is very narrow so I can get it into my wood shed to process in there instead of having to be out in a wide open area. The Subaru engine is quiet and my only complaint on that is when splitting vertical is the exhaust is a little close to my face. Nothing I couldn't fix down the road however. It seems to run all day on a full tank of gas but I never keep it filled up so the problems from the ethanol are hopefully kept to a minimum. I also shut off the fuel and let it run out each time before I put it away. Thing fires up each time on the first pull.

Glad to hear that you are enjoying your gravely! Do you find the table to be a help, or a hindrance? I also feel that the dealer only being 10 minutes away is a big plus, and I also like giving business to local shops.
 
We were selling Timberwolf and GNE 2 way splitters when Ariens and Gravely launched their splitter line a couple years ago. We are now stocking only the Ariens and Gravely units. With the Subaru engines and the build quality of the machine they are the best value on the market today. No warranty issues on any machines we have retailed so far!:clap:

That's great to hear! I find that I research this stuff to death. Like beating a dead horse. Do you find any difference between the ariens and gravely? Anyone making after market wedges that you know about?

Thanks,

Mike
 
That's great to hear! I find that I research this stuff to death. Like beating a dead horse. Do you find any difference between the ariens and gravely? Anyone making after market wedges that you know about?

Thanks,

Mike

Quality wise they are both bulletproof-Just that the Ariens is short the work table. With the design of the wedge profile and the fact that the wedge is on the cylinder and not fixed to the beam-I don't know of any 4 way wedges available.
 
I looked at just about everything on the market two years ago and ended up buying an Ariens 27 ton splitter from my local hardware store. Love everything about it design and build wise except that it's not a full beam type of splitter. Love the Subaru engine. Runs perfect and is easy on fuel. I bought the optional log cradle and work table. Ordered the table through Home Depot since they had a better price than my local dealer. I find the table very useful for those pieces that need an extra split or two, and, it protects the oil filter, which would otherwise be exposed to an errant split hitting it. It was one of the few splitters set up so you could work easily from either side, or have two guys working it at the same time, at least in the price range I was looking at.

Now, having said all that, I was at the my local dealer last weekend and they had the same unit out front for sale. Of course I had to take a look to see what changed and couldn't believe the beam and foot (piece the log get's pinned against) is now formed out of sheet steel, albeit heavy gauge. My unit is a solid beam and the foot is a welded on 2" thick hunk of steel. No comparison to the new unit I was looking at last week. I have to say, I would NOT buy that model today. I did not talk with anyone at the dealer to see if this was a new model priced lower, and maybe they are still selling the unit I have. All I can say, is make sure you see the Ariens or Gravely in person to check all the features. I'm still in shock how they cheapened it up from a few years ago.
 
Would love an I and O!!!

Look at the splitters from Brave, They're made by I&O.
I bought a well used 34 ton model a few years ago and love it, well built with quality parts and pretty much indestructible.
I picked mine up off of CL for around $800.
When I bought it, I didn't have the money for a new unit so I thought I'd buy a used one, use it for a couple of years and sell enough wood to buy a new one. This splitter has impressed me so much, I lost all interest in replacing it.
I don't know if the Brave line is a regional thing or if they sell nationally. You don't see a lot about them on the forum. They're made in Streator Illinois and I'm located in Missouri. A lot of the dealers around me sell them.
 
I looked at just about everything on the market two years ago and ended up buying an Ariens 27 ton splitter from my local hardware store. Love everything about it design and build wise except that it's not a full beam type of splitter. Love the Subaru engine. Runs perfect and is easy on fuel. I bought the optional log cradle and work table. Ordered the table through Home Depot since they had a better price than my local dealer. I find the table very useful for those pieces that need an extra split or two, and, it protects the oil filter, which would otherwise be exposed to an errant split hitting it. It was one of the few splitters set up so you could work easily from either side, or have two guys working it at the same time, at least in the price range I was looking at.

Now, having said all that, I was at the my local dealer last weekend and they had the same unit out front for sale. Of course I had to take a look to see what changed and couldn't believe the beam and foot (piece the log get's pinned against) is now formed out of sheet steel, albeit heavy gauge. My unit is a solid beam and the foot is a welded on 2" thick hunk of steel. No comparison to the new unit I was looking at last week. I have to say, I would NOT buy that model today. I did not talk with anyone at the dealer to see if this was a new model priced lower, and maybe they are still selling the unit I have. All I can say, is make sure you see the Ariens or Gravely in person to check all the features. I'm still in shock how they cheapened it up from a few years ago.

I think the setup you describe is on the new 22 ton Ariens units. I believe (I could be wrong) that the 22 ton is a new offering, and my local Home Depot had them selling at $999. The 27 & 35 ton units are still made with the 2" thick hunk of steel. They weren't available a year ago...
 
I could afford the I AND O if they offered financing. The gravely dealer had 48 months interest free. What I can't afford is my wife gutting me when she sees how much I spent on a splitter.


I know I am the new guy and I will probably get attacked pretty hard core but if you are having to depend on financing to buy a splitter you would probably be better off to buy a Fiskars X27 and put some money in savings. I am wanting a super split so bad I can taste it but I can't bring myself to spend the money out of savings. If I were going to have to finance it there is no freaking way I would buy one. I would split some wood by hand and sell it you can pay cash for the splitter you want. Even though it's interest free I wouldn't want to put my neck on the line when your not getting paid interest at the bank for your money. I did not mean this in any form of condescending way and I hope you will not take it that way.
 
Last edited:
I know I am the new guy and I will probably get attacked pretty hard core but if you are having to depend on financing to buy a splitter you would probably be better off to buy a Fiskars X27 and put some money in savings. I am wanting a super split so bad I can taste it but I can't bring myself to spend the money out of savings. If I were going to have to finance it there is no freaking way I would buy one. I would split some wood by hand and sell it you can pay cash for the splitter you want. Even though it's interest free I wouldn't want to put my neck on the line when your not getting paid interest at the bank for your money. I did not mean this in any form of condescending way and I hope you will not take it that way.

Hey step up. No offense taken and glad to have a good discussion on all topics. I don't have to rely on financing, and could buy it right now if I chose. He reason I like the financing is because its like free money. I can get into a new splitter or about$ 35 per month, interest free , while keeping my money liquid for other things, or 2 percent interest that its getting now. I like using the dealers money especially when it doesn't cost me anything to stretch it out over 4 years. Is this right, I don't know, but it fits my needs.
 
I know I am the new guy and I will probably get attacked pretty hard core but if you are having to depend on financing to buy a splitter you would probably be better off to buy a Fiskars X27 and put some money in savings. I am wanting a super split so bad I can taste it but I can't bring myself to spend the money out of savings. If I were going to have to finance it there is no freaking way I would buy one. I would split some wood by hand and sell it you can pay cash for the splitter you want. Even though it's interest free I wouldn't want to put my neck on the line when your not getting paid interest at the bank for your money. I did not mean this in any form of condescending way and I hope you will not take it that way.

Welcome to the site New Guy. I just bought a 22 ton Huskee partly because they had 6 months 0%. I have an older I beam splitter that needs a lot of work. I was looking at, at least $500, so I said what the heck, free finance, go for it. If you have time and wood, financing may not be a bad thing. Although I agree, I don't like financing something unless I have too, Joe.
 
I think the setup you describe is on the new 22 ton Ariens units. I believe (I could be wrong) that the 22 ton is a new offering, and my local Home Depot had them selling at $999. The 27 & 35 ton units are still made with the 2" thick hunk of steel. They weren't available a year ago...

You may be right - hope so. I thought I was looking at the 27-ton unit but now I'm not sure. Gonna' have to take another look next time I stop at the dealer. If so, sorry for the false alarm.
 
Glad to hear that you are enjoying your gravely! Do you find the table to be a help, or a hindrance? I also feel that the dealer only being 10 minutes away is a big plus, and I also like giving business to local shops.

The work table is in a good spot and really does help out when splitting alone. I am not sure how it does it but it does manage to hold the other half of the round with all the vibration and such pretty much most of the time. If I am lucky enough to get someone to help me the table is nice for that person to keep the round close for the next split without having to reach to far. I think they built a really good overall machine just don't let the small size fool you. I know the more metal usually means more sturdy but so far no issues and I like being able to move it around by myself in the grass or in and out of the garage to hook it up to the truck.
 
You may be right - hope so. I thought I was looking at the 27-ton unit but now I'm not sure. Gonna' have to take another look next time I stop at the dealer. If so, sorry for the false alarm.

Well, stopped at the hardware store/dealer this morning. They had both the 22 and 27-ton Ariens models there. BOTH had boxed steel beams and footers. Major cheap out on how they're making them now. Maybe the 34-ton model still has the solid i-beam and foot. Maybe the OP can find a leftover with the better steel. Again, I would not have bought it the way it's made now. I was close to buying the Northerntool 30-ton with the Honda GX engine. I think it goes on sale every fall for a hundred or two off. The only thing I didn't like about that unit, which is a full beam model, is no hydraulic oil filter, just a screen. And, when I call NT to see if I could add a filter, they said it would void the warranty. WTF?
 
Formed ain't necessarily bad. You can make a lot of strength with less weight with a good design. (I'm biased, it's what I do for a living.) I'll have to go look at the Ariens/Gravely units before I have an opinion on their design, though.

I personally think filters on a simple system are overrated as well. It's a closed system, so unless you're introducing dirt to it yourself, any contaminants in there are most likely coming from a pump on it's way out anyhow. My splitter (albiet with a vane pump, which is a bit different), has been running for over 30 years with no filter, and no oil changes either. Hyd oil still clear after all these years. More complex systems, or anything with quick connect couplers (a great way to introduce dirt to a system), would be a different story.
 
Well, stopped at the hardware store/dealer this morning. They had both the 22 and 27-ton Ariens models there. BOTH had boxed steel beams and footers. Major cheap out on how they're making them now. Maybe the 34-ton model still has the solid i-beam and foot. Maybe the OP can find a leftover with the better steel. Again, I would not have bought it the way it's made now. I was close to buying the Northerntool 30-ton with the Honda GX engine. I think it goes on sale every fall for a hundred or two off. The only thing I didn't like about that unit, which is a full beam model, is no hydraulic oil filter, just a screen. And, when I call NT to see if I could add a filter, they said it would void the warranty. WTF?

Wow...I am surprised. Must be some leftovers at my HD. My unit had a hunk of 2" solid steel welded to the beam.. Heavy as heck, but solid as could be!

****Wait a minute.....Wait a minute!! I missed this the first time!! Did you say its a boxed steel frame instead of a solid steel I-beam?? That IS a major cheap job if the 27 & 35 tons are still drawing the same price as last year!

UNLESS.... those are the big box versions?


Sent from my iPhone using Tapatalk
 
Last edited:
I have the newer 27 ton ariens with the boxed in steel and its strong as heck. I've put some big nasty twisted cherry crotches on it and nothing bent or twisted. Plus I no some good fab guys that build strong stuff with welding thick plate steel together. Ariens make good stuff so I can't see them changing a design to make machine not as good as a older one.
vusuby3y.jpg
ame8yda6.jpg
 
Last edited:
Formed ain't necessarily bad. You can make a lot of strength with less weight with a good design. (I'm biased, it's what I do for a living.) I'll have to go look at the Ariens/Gravely units before I have an opinion on their design, though.

I personally think filters on a simple system are overrated as well. It's a closed system, so unless you're introducing dirt to it yourself, any contaminants in there are most likely coming from a pump on it's way out anyhow. My splitter (albiet with a vane pump, which is a bit different), has been running for over 30 years with no filter, and no oil changes either. Hyd oil still clear after all these years. More complex systems, or anything with quick connect couplers (a great way to introduce dirt to a system), would be a different story.

Yeah, I agree no filter isn't the end of the world, and it wasn't what kept me from buying the NT splitter, but it did factor in a bit. The Ariens was local, full of oil and ready to go while I would have had to order and wait for the NT one, then put it together, and buy oil for it locally. Convenience won out, ha! But, I was going to add a filter to the NT one if I bought it just for peace of mind.
 

Latest posts

Back
Top