Got another 028 a couple weeks ago that needed a p and c. Ordered a chinese 028 super kit put it on and had way to much squish around .050 so I took .025 off the base and cleaned up and widened the intake and exhaust ports a little. Rebuilt the carb, crank seals, fuel lines, impulse line, and a new plug and is gutless in the cut.
Iv ran it a cut or two without the filter with no difference
My 024 will run circles around it. It also sounds like a fluttering noise coming from the carb with or without the air filter on.
Shouldn’t the 028 be about the same power as a ms290?
So my question is do you guys think my port timing is way off due to taking material off the base?
Iv ran it a cut or two without the filter with no difference
My 024 will run circles around it. It also sounds like a fluttering noise coming from the carb with or without the air filter on.
Shouldn’t the 028 be about the same power as a ms290?
So my question is do you guys think my port timing is way off due to taking material off the base?