jbos333
ArboristSite Lurker
this is how I do it...full face cord (1/3 cord) on a pallet
or 1/2 face cord on a pallet double stacked
How to effeciently stack firewood?
- Thread starter esshup
- Start date
Help Support Arborist Forum:
this is how I do it...full face cord (1/3 cord) on a pallet or 1/2 face cord on a pallet double stackedjimbojango
ArboristSite Guru
Get fertilizer/chemical totes from your local co-op, but the tops out and BAM, instant wood storage. For you guys that are going to be thanking me for the next year... Yes, i know i'm a genius. AND the totes are FREE 99% of the time.
jimbojango
ArboristSite Guru
why jerk the tank out? just take the saw's all and cut the top out so the bark and BS that falls off isn't all over everything. Great minds do think alike though
TheLazyBFarm
ArboristSite Operative
Are you talking about the totes like what joesell posted in post #20? If so, those go for $75 around here. Not sure if worth it......
lefturnfreek
Sharpen the chain, chuck chips ...repeat...
And this is how I move 1.4 - 1.6 cord to my stove......
why jerk the tank out? just take the saw's all and cut the top out so the bark and BS that falls off isn't all over everything. Great minds do think alike though
I really haven't noticed a problem with the bark to much. I mainly pull the liner so the air can flow through and dry the wood.
I was making cages out of pallets and green treated 2x4's, but I had almost $20 into each one anyway and I was constantly fixing them.
The totes are on there second year and show no sign of any problems.
Take the liner out and you have 2 bins: one plastic and one metal!
Philbert
Philbert
jimbojango
ArboristSite Guru
Drive to Kansas with a goosenexk and Ill stack so many on it costs less than $10
The plastic doesn't hold up so good without the bin to support it.
Coldfront
Addicted to ArboristSite
I don't even bother stacking it anymore, as fast as I'm burning it is a waste of time. I just chuck it up on the front porch now in a pile, screw it!
timbrjackrussel
ArboristSite Guru
What about using that tall round bin in the background? I know it will be hard to move it!
That's an old corn crib. I actually thought about running the conveyor up to it but it would be a pain to get the wood out of.
The whole point of the bins is to be able to stack a bunch of wood out in the sun and wind and be able to easily move it over to the OWB.
When it's cold like it has been, I go through 2 bins a week.
The whole point of the bins is to be able to stack a bunch of wood out in the sun and wind and be able to easily move it over to the OWB.
When it's cold like it has been, I go through 2 bins a week.
My wood is split for next year. I just leave it in a pile most of the summer, cures faster than stacking. Before cold sets, I will stack under a portable carport on old landscape timbers to keep it off the ground. Portable carport is 14x19 ft. I will stack one row across the opening and then one row down each side. Then I stack everythng crossways until the shed is full. To use old wood before new, I just back into the opposite end of the shed to where the older wood is stacked and load up. If i dont empty the shed in one season, I replace the wood i did use and the next year work from the other end. This year the shed is empty so all wood will be this years wood. In fact, if it turns cold again, I might have to burn some of the fresh split wood.
Oliver1655
Addicted to ArboristSite
Jimbo, how much lead time would you need on the totes? It would be around 580 miles round trip for me, but it might be worth it. I have a 20' flatbed trailer. how many do you think I could get on it?
You can fit 2 wide and 2 high. There 42" wide on the short side. So you can fit 5 rows easy and maybe a 6th if you let them hang over on each end. Plus 2 in the back of your truck. So 22 or 26 depending on how they go on.
Gonna need a **** load of straps though.
UpOnTheHill
ArboristSite Guru
Is that a Yamaha GP with the white and red cowel? And a wet bike in the back?On the right hand side, pallet with some wire mesh....
Poston5
ArboristSite Operative
How many years of use are you getting out of the cages. I have like 30 of these and might try it. We get concrete cure in these and cant find anybody that wants them. I could throw the wood right in them and then move them with my forks.
I'm on my second year and most look great. I had a few that were beat up to begin with so I took off the bottom and mounted the cage on a pallet. I also had 2 that froze into the ground and a wrecked the bottoms when I grabbed them with the skidder. I'll just screw those to a pallet too.
I'm really happy with the way it's going. I just wish I could find them cheaper/free like there seems to be in other parts of the country.
I'm really happy with the way it's going. I just wish I could find them cheaper/free like there seems to be in other parts of the country.
