Aggie 2012
ArboristSite Operative
Howdy gents
I've got a husky 350 that has an obvious sir leak. When I crank it up it revs to half throttle.
Pressure tested and doyens it leaking from the fly wheel side bearing/seal.
After disassembly i have found that these seals and bearings are manufactured together.
But look at these bearings and tell me if this might be my problem. (Ball bearings are exposed on one and covered on the other)
The bearing on top came from the side that was leaking.
Is it missing the inside seal and could this have cause my air leak?
Also,
Where did the rest of this seal go?
Thanks for your help
Sent from my iPhone using Tapatalk
I've got a husky 350 that has an obvious sir leak. When I crank it up it revs to half throttle.
Pressure tested and doyens it leaking from the fly wheel side bearing/seal.
After disassembly i have found that these seals and bearings are manufactured together.
But look at these bearings and tell me if this might be my problem. (Ball bearings are exposed on one and covered on the other)
The bearing on top came from the side that was leaking.
Is it missing the inside seal and could this have cause my air leak?
Also,
Where did the rest of this seal go?
Thanks for your help
Sent from my iPhone using Tapatalk