Husky 372xp Crankshaft needed.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cyclic

ArboristSite Lurker
Joined
Jan 13, 2007
Messages
5
Reaction score
0
Location
Australia
Hi from OZ!
First post, so go easy.
Chasing a crankshaft for a Husky372xp. Looks like according to the IPL, new, you have to buy the complete assembly. That assy seems to fit about 3 different models...the 362 /365 /372. Part No. 5037487-03 That sound about right?
(While we're on the subject, difference between the 372 and the 372xp??)
I'm happy to buy second hand, but if not where's the cheapest place in the states to get one?

Seems Husky know they have a problem with the big end bearing, a new rev limiter mod is out. Not enough oil to the bearing at high revs it seems.

Many thanks...

Andrew ;)
 
Yes,they share all the same crank.From what i know,all the 372 were"xp",because they all have closed ports cyl.The"non-xp" cylinder with open transfers are found on many others saws in Husky lineup.
 

Latest posts

Back
Top