not if you timed it at the same time - if you reproduced that time AND tached in the cut you couldn't be holding it up...
I'd assume he has thought about this and found it doesn't affect the results. If you were using a half decent camera the mic preamp should adjust the gain so it won't clip
that would work except for one problem, i dont have the same piece of wood.
the camera is not mine and it is a cheapie.
sper ho,
i will admit i didnt tach the saw in the wood with that bar and chain. i wouldnt think the rpm to have dropped that much with a 20" instead of the 16" bar.
i have the b+c on my 455 since the GTG sitting unused. i will test it this weekend.
Last edited: