I rescued a 029 today couldn't stand it in a pile of 30 wildthings. The ugly pictures

[Work Saw Collector]

I rescued a 029 today, I couldn't stand it in a pile of 30 wildthings. The ugly pictures. Not sure its worth fixing. Who would think painting it would make it look better? I haven't checked it out yet, but feels like no compression.

 

[Arrowhead]

Even if its not worth fixing, a proper burial would be in order, NOT in a pile of dead wildthings! Good Luck

 

[Saw Dr.]

Send it to me. I love Supers. It will run again if you do. I have a piston sitting here now.

 

[Work Saw Collector]

Let me look it over and see how bad it is.

 

[breymeyerfam]

it looks stolen

 

[FamilyTradition]

Good find, hope it doesn't need too much. Would love to have seen it with all of the Wild Thing's, as that would have been a picture! Best, Max.

 

[Work Saw Collector]

Good find, hope it doesn't need too much. Would love to have seen it with all of the Wild Thing's, as that would have been a picture! Best, Max.

I didn't take my camera to the saw shop with me, but would have been cool.

 

[Modifiedmark]

Good find, hope it doesn't need too much. Would love to have seen it with all of the Wild Thing's, as that would have been a picture! Best, Max.

Yeah that would have been nice! A birds of a feather flocking together picture!

 

[STEVEGODSEYJR]

That is the 029 Night Rider version.

 

[Work Saw Collector]

That is the 029 Night Rider version.

That is funny.

 

[epicklein22]

I might have a handle if you do decide to rebuild it.

 

[Work Saw Collector]

I might have a handle if you do decide to rebuild it.

Thanks.

 

[dragrcr]

I will take it if you dont fix it, will get it running again too, with pics and videos

 

[little possum]

A big hoorah for a hero. Is that a Jonesastihl? or a Stihlmar?

I think everybody should carry a camera with them, always somethan interesting to take pictures of. Ive seen plenty at the saw shops.

 

[Saw Dr.]

Saw Dr. performed the autopsy lastnight. Going to rebuild this one for a friend who needs it more than me. So far the top end is wasted, crank bearings noisy, flywheel missing fins, fuel line and impulse line crap. Cylinder looks iffy, but I have a good 45mm top end if need be. I have tons of 1127 parts, so I'm figuring about $60 out the door if I go with aftermarket parts.

It looks like the saw got painted to cover up a profanity that was written on the top in permanent marker. Maybe a pizzed off woman??? I stripped the black lastnight, and found the "artwork." I'll get some pics up along the way.

 

[CharlieG]

Absolutely more pics!

 

[Work Saw Collector]

Saw Dr. performed the autopsy lastnight. Going to rebuild this one for a friend who needs it more than me. So far the top end is wasted, crank bearings noisy, flywheel missing fins, fuel line and impulse line crap. Cylinder looks iffy, but I have a good 45mm top end if need be. I have tons of 1127 parts, so I'm figuring about $60 out the door if I go with aftermarket parts.

It looks like the saw got painted to cover up a profanity that was written on the top in permanent marker. Maybe a pizzed off woman??? I stripped the black lastnight, and found the "artwork." I'll get some pics up along the way.

I'll be happy to see it up and going, should make someone a nice saw. I still have a 029 S and I use it.

 

[andrethegiant70]

Nice work saving this one, it looked like it had potential to me. Sounds like your shop has a lot in common with mine.... boxes of stuff just waiting for the right saw.

 

[Saw Dr.]

I set a new personal best on this strip-down. 28 minutes. Maybe not up to Thall and Fish levels, but I think it is pretty good for a rookie.

OK, Pics you get. I hope the first one is not against forum rules.

Not too bad on the inside. I think the damage occurred on the outside, and the owner painted it to hide the writing.

The crank and piston assy with bad seals, bearings, and of course the scored piston. Middle is the "custom" impulse line. Right = busted flywheel. I just gave one of these away too, #@!&%

The fuel line is "modded" too. They skimmed the outside of it with some RTV to fill in the cracks.....

I laid the air filter on this paper towel so it would be easier to see.

 

[Saw Dr.]

The cylinder is (obviously) scored. I have not started the cleanup yet. A little worried about that mark 2/3's of the way to the left. Just about catching a fingernail in it already, and I have not put any acid on there yet.

Drive sprocket is not too badly worn. I bet this is the original too. Sad that someone would just destroy this thing.

I hate it when they're dirty like this.