redbull660
Addicted to ArboristSite
That wood looks pretty hard
That's what She said!
That wood looks pretty hard
Don't you have a new saw to get dirty .................That's what She said!
I've got 395 parts to clean, but first things first I got the Tsumura T&L bar in the mail today, along with a new loop of Stihl RS chain. Here she is, still on her first tank of fuel.
Here's my 390XP, different B&C, although the exact same specs. This chain has been filed.
The MS661 isn't going to equal the 390XP, but I think it probably has the edge in torque, especially considering it has almost no run time on it. I'll know more when we get them in the same wood with cut times all the way through the log.
I finished that up Saturday. I have not had a chance to sharpen the chain or make a new vid. Last night I had to get on the roof and re-caulk around the chimney. Tonight I had to install a garbage disposal. It might be the weekend before I get to it. Sorry guys. When you don't get home until 30 minutes before sunset, that doesn't leave much time.
I've got 395 parts to clean, but first things first I got the Tsumura T&L bar in the mail today, along with a new loop of Stihl RS chain. Here she is, still on her first tank of fuel.
Here's my 390XP, different B&C, although the exact same specs. This chain has been filed.
The MS661 isn't going to equal the 390XP, but I think it probably has the edge in torque, especially considering it has almost no run time on it. I'll know more when we get them in the same wood with cut times all the way through the log.
It's dead Ash.That wood looks pretty hard
I'll be doing it Saturday.How's the "other" one coming
Thank you, SirI'll be doing it Saturday.
I would have been shocked if the 661 made the RPMs of a 390XP. They are simply insane the way they run. Compression on this 661 was 178. I don't recall what the 390XP is, but it's under 200 PSI.That 390 sounds to hold rpms better in the cut vs the 661. Of course the 661 has no run time or break in time on it yet. Brad, what is the cranking psi of them saws? Care to share what you did to the 661?
Healthy comp on both saws. Curious what the 661 goes up to as more run time gets on it. I never ran a 390 but it seems i may have to find one to rip on. Lol. So, what is squish on both saws? You care to reveal what you did to the 661? Popup? Machine base? Port timing? Ignition timing advance? One thing for sure is that you surely can lean on that 661 more and the chain stays going, instead of it just falling on its face and the chain stopping.I would have been shocked if the 661 made the RPMs of a 390XP. They are simply insane the way they run. Compression on this 661 was 178. I don't recall what the 390XP is, but it's under 200 PSI.
That's back in the thread somewhere.Healthy comp on both saws. Curious what the 661 goes up to as more run time gets on it. I never ran a 390 but it seems i may have to find one to rip on. Lol. So, what is squish on both saws? You care to reveal what you did to the 661? Popup? Machine base? Port timing? Ignition timing advance? One thing for sure is that you surely can lean on that 661 more and the chain stays going, instead of it just falling on its face and the chain stopping.
The port timing is there somewhere.What is? I didn't see anything posted and i went thru all 35 pages.
So, what is squish on both saws? You care to reveal what you did to the 661? Popup? Machine base? Port timing? Ignition timing advance?.
You can't do a popup without cutting the base.What is popup for $200 Alex?
BRad don't do No Stinkin' Bases
I's Just Teasin' BradYou can't do a popup without cutting the base.
Enter your email address to join: