Livennine01
ArboristSite Lurker
Not sure what the problem is here. My splitter will run fine when idling but when you extend the cyclinder it makes a weird noise. It's not the squeal noise when you are at the end or anything. Also the noise occurs again when you retract it. I've opened the lines and tried to bleed them thinking there might be some air, but no dice still does it. This is not to say that I am not bleeding correctly either. Last night I redid the fittings from the filter to the pump. Something also is that my splitter made a similar noise like this a long time ago with the coupling. However that problem was that the new engine didn't properly align exactly to the pump and shredded the love joy spider. I've since found a pump mount and it has ran fine good until now. I've also checked the spider and without taking the whole thing apart, it looks good and mounting bolts are tight. I am at a lost as to what is causing this.
8hp Briggs engine, rebuilt cylinder 1 1/2 year ago, high usage split almost weekly.
Thanks in advance
8hp Briggs engine, rebuilt cylinder 1 1/2 year ago, high usage split almost weekly.
Thanks in advance