Hedgerow
HACK
I've always preferred cutting barefoot when testing a saw...
I like the feel of the wood chips between my toes....
I like the feel of the wood chips between my toes....
never mind the safety gear, we're You-Tubin!
- Thread starter bikesandcars
- Start date
Help Support Arborist Forum:
Hedgerow
HACK
Man...
Who built that turd...???
You need to start over on that thing...
:big_smile:
R1!
ArboristSite Operative
Safety Gear, Wear it.
Theres a lot of good people here.
Cant afford to loose many.
Theres a lot of good people here.
Cant afford to loose many.
little possum
Crash and Burn
Ive rolled outta bed, slipped on my flip flops and test ran saws for dad a lot. Its cookie cutting. Yes things can go bad, but its like riding dirtbikes/motorcylces. The instance you think you have it under control, it will show you otherwise. Always be aware!
But do have PPE minus steel toes. But big log falls or the tractor runs over me, its just gonna crush em off anyways
But do have PPE minus steel toes. But big log falls or the tractor runs over me, its just gonna crush em off anyways
If Im just tuning a saw in the cut I will just grab a pair of ear plugs. If I am doing anything more Its chaps and helmet. If im out felling or doing firewood, I well wear steel toes, any thing else I dont. I figure the chance of it actually hitting the toe cap, and not glancing off to hit something else is so low, I dont find it worh it. I just wear them incase I drop a log on my foot. Now proper chainsaw boots are a differnt story.
I am with you, and if someone chooses to not use safety gear and video tape it...... I don't feel bad laughing when they get busted up. :msp_biggrin:
Forget the shorts, on that first "cookie" I thought we were going to witness a "do-it-yourself vasectomy":msp_ohmy:
I always wear gloves, ear & eye protection and most times my helmet too. I only wear my chaps when I've got a lot of cutting to do, not when a limb or two needs to be cleared. I don't have the steel toe boots though.
deepsouth
ArboristSite Guru
Tinnitus is a #####.... almost like youre wife whining at you all the time, especially when you're trying to go to sleep.....
And I've had it from way before I ran chainsaws or other noisy OPE..... in fact I mow with heavy duty earmuffs now, always use saws with heavy duty peltor muffs or helmet with muffs. In fact the 2095, only gets used with the fat muffs as the helmet muffs aren't good enough at blocking the noise.
Steel caps are my usual footwear with wood.... plus chaps, youngstown gloves etc.....
towingace
ArboristSite Guru
Damn, me too!:msp_scared:
Noticed something else in a few YouTube videos:
Near as I can tell, LEFT handed operation puts the operator square in the kick-back zone??
Don't confuse this with reading the manual just cause I looked the the picture. I can read pictures all day long!
Do these guys like their LEFT leg, the "boys" or their neck & shoulder??`
AR
LEFT handed saw operation....
Near as I can tell, LEFT handed operation puts the operator square in the kick-back zone??
Don't confuse this with reading the manual just cause I looked the the picture. I can read pictures all day long!
Do these guys like their LEFT leg, the "boys" or their neck & shoulder??`
AR
I never point my chainsaw at anything I am not willing to destroy.
Sometimes the saw has ulterior motives.
Kind of like girlfriends and ex-wives. Sometimes they do a 180 on ya'
Kind of like girlfriends and ex-wives. Sometimes they do a 180 on ya'
I thought about counting how many times this guy swaps right/left
It makes me cringe seeing him draw the tip out through the cut.
It makes me cringe seeing him draw the tip out through the cut.
Matt81
Bliss: Saw full of fuel and yard full of trees!
Safety gear should be a "last resort" item of protection. I am not talking about gloves and ear protection and eye protection, if you don't use these you are just plain dumb. I mean helmets and chaps, cut proof gloves and cut proof jackets...etc...etc. I don't always use the full range of saw PPE as it is just to hot here when it's regularly over 105 F when i'm working. If i always wore a helmet on the ground plus gloves, chaps and cut proof jacket i would die from exhaustion and dehydration long before i would die from any blood loss. 
When I'm climbing obviously it's a different story. Too many variables and too many things have the possibility of going wrong when hanging from a rope 30m in the air.
Good training and good sound saw handling technique (and following that technique ALWAYS) should constantly be used to minimise risks. If you are following through from a cut into your own leg or something similar i don't believe you should be handling a saw.
Just one example, I was taught to cut when bucking to always have the saw far to my right side and not to lean directly over the saw chain when cutting. That way in a kickback the natural arc of the saw will be to my side and not into my head.
Seems a no brainer but so many people do it.
I cannot use a saw without PPE because i feel kinda naked without it. Even if i am just test cutting cookies while tuning a saw, i will ALWAYS have at least gloves, safety glasses and ear protection. Plus i cannot turn up at a job and expect people to take me seriously if i don't at least look professional in what i do.
Sometimes ignorance is bliss. If that bloke knew the dangers of what he was doing, and had ever seen the injuries people get from being unlucky and using zero PPE, when doing the exact same thing he does with a saw that size, he would need new trousers.
When I'm climbing obviously it's a different story. Too many variables and too many things have the possibility of going wrong when hanging from a rope 30m in the air.
Good training and good sound saw handling technique (and following that technique ALWAYS) should constantly be used to minimise risks. If you are following through from a cut into your own leg or something similar i don't believe you should be handling a saw.
Just one example, I was taught to cut when bucking to always have the saw far to my right side and not to lean directly over the saw chain when cutting. That way in a kickback the natural arc of the saw will be to my side and not into my head.
Seems a no brainer but so many people do it.I cannot use a saw without PPE because i feel kinda naked without it. Even if i am just test cutting cookies while tuning a saw, i will ALWAYS have at least gloves, safety glasses and ear protection. Plus i cannot turn up at a job and expect people to take me seriously if i don't at least look professional in what i do.
Sometimes ignorance is bliss. If that bloke knew the dangers of what he was doing, and had ever seen the injuries people get from being unlucky and using zero PPE, when doing the exact same thing he does with a saw that size, he would need new trousers.
Educate me on the hazards of drawing the tip through the cut. NO, I don't draw the tip through the cut; it really never crossed my mind; but, I don't recall it ever being discussed on AS as hazardous. I am big on safety, so if something is unsafe I want to know. Thanks in advance.
