Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[Work Saw Collector]

Yellowbeard this is a pic from a few GTG's back they are bigger (more members) now.

A tip to help find me in that pic, I'm the good looking one :hmm3grin2orange:

 

[RVALUE]

opcorn:

 

[twochains]

Hello all! So, does anybody know that Stumpy can build a Hell of a motor??? Sure you do!...but did you know he could put together one of the fastest mini-quads in the country??? With Stumpy's precision on timing and assembly combined with my tuning here is what we put together...

This is a TT race from the other weekend, I was still tuning and was having a problem with my Son's launch out of the gate. He ran last place for 3 laps letting the leader get away but watch the vid close for a ballsie pass into the first turn. My Son is 10 and I would say this speedway track was one heck of a rush! This vid was shot by another parent...my Son's name is Colt.

Total props to Stumpy w/o his help this motor would not be! Thanks again Stumpy!!

https://www.youtube.com/watch?v=wsG2QffpQvI

Colt went from last to 2nd and that is where he finished. I finally got his tune right and we are off to the races for 2moro!

 

[Work Saw Collector]

I loved that pass I bet he would have been the leader with a little better of the line, I bet he will next time.

 

[Work Saw Collector]

To tell the truth I was jumping up and down in the recliner when he went around those two.

 

[workshop]

What an AWSOME pass. I, too, was jumping out of my chair. Tell him "Congratulations". Next year I see him in a Sprint cup car.

 

[workshop]

View attachment 292532

A couple of new additions to the family. One from the scrap pile and one from CL. 1800 and 2000.

 

[Work Saw Collector]

View attachment 292532

A couple of new additions to the family. One from the scrap pile and one from CL. 1800 and 2000.

Nice table.

 

[Yellowbeard]

Hey all!

I am in Fayetteville Arkansas. Just bought an 075 and am setting it up to mill and have an 028 WB that was dad's that I use for smaller stuff. Glad to see there's such a strong presence in the four state area.

W.C.

 

[Freehand]

I'm in Fayette too……..

 

[RVALUE]

wanna build 40 pins? About 3/8 x 1.5 inches

 

[cobey]

View attachment 292532

A couple of new additions to the family. One from the scrap pile and one from CL. 1800 and 2000.

those are cute little guys!!!!

 

[workshop]

Got a Mac 1-70 with some minor aluminum corrosion going on in the carb box. What's a good way to clean that out?

 

[lumberjackchef]

those are cute little guys!!!!

yep and they wear big boy britches!:hmm3grin2orange:them little fellars are cutting machines for their size

 

[cobey]

yep and they wear big boy britches!:hmm3grin2orange:them little fellars are cutting machines for their size

I really like the look of them..... but I got to watch out for poulan cad! :eek2:

 

[Freehand]

wanna build 40 pins? About 3/8 x 1.5 inches

Bowling, straight, or king? :feel_good:

 

[jerrycmorrow]

Hey all!

I am in Fayetteville Arkansas. Just bought an 075 and am setting it up to mill and have an 028 WB that was dad's that I use for smaller stuff. Glad to see there's such a strong presence in the four state area.

W.C.

I'm right outa f'ville. Tween f'ville, g'land, & pg. glad to see ya. Rep to ya

 

[Work Saw Collector]

Hey all!

I am in Fayetteville Arkansas. Just bought an 075 and am setting it up to mill and have an 028 WB that was dad's that I use for smaller stuff. Glad to see there's such a strong presence in the four state area.

W.C.

Welcome to the thread, if you have questions just ask. The most of us are just saw guys and don't mill but I think there is three in here that do.

 

[sawnami]

Got a Mac 1-70 with some minor aluminum corrosion going on in the carb box. What's a good way to clean that out?

Are you looking for a mechanical or chemical method?

 

[workshop]

Either one. Whichever is easiest and does a better job.