jerry wayne
ArboristSite Operative
Specifications If you lookie see ,these numbnutz have put both the hydro hookup unit and the P T O hook up on the same speck sheet.I think i am reading this correctly,the P T O driven unit does-not rely on the tractor hydrylics at all as long as the PTO shaft is puttin out the correct revolutions.? I just tested my pressure and it is only at 1500 psi meeger at best.the hydro hookup version of this only puts out 9 ton of force with 1500.any advise or comments would be appreciated:computer:
Tractor Hitch Categories . . . . . . . 1, 2, & 3
Beam . . . . . . . . . . . . . . . . . . . . . 6" x 6" reinforced heavy-duty H-Beam, 68.5" long
Wedge . . . . . . . . . . . . . . . . . . . . High carbon steel, compound angle
Cylinder Stroke . . . . . . . . . . . . . 24 inches
Cylinder Size . . . . . . . . . . . . . . . 4" x 24" clevis type cylinder, 1.75" rod
Safety Release Control Valve . . . Detent, auto return
Log Opening . . . . . . . . . . . . . . . 25 inch maximum
Operating Positions . . . . . . . . . . Vertical/Horizontal
Pin Width . . . . . . . . . . . . . . . . . . 36 inches
Splitting Height (horiz. position) 30 inches
Shipping Weight
TMVH02/PTO . . . . . . . . . . . . . 563 lbs.
TMVH03/HYD . . . . . . . . . . . . . 535 lbs.
TRACTOR HYDRAULIC SPECIFICATIONS for Model TMVH02/PTO
Hydraulic Oil
Above 30° F . . . . . . . . . . . . . . Use AW-32, 10W (non foaming) or ATF Dextron III
Below 30° F . . . . . . . . . . . . . . . Use only ATF Dextron III
Hydraulic Tank Capacity . . . . . . . 7.2 gallon
Hydraulic System . . . . . . . . . . . . 9.5 gallon capacity (includes tank, cylinder, filter, hoses)
PTO SPECIFICATIONS
Force . . . . . . . . . . . . . . . . . . . . . 20 ton splitting force
Gear Pump (PTO) . . . . . . . . . . . Single-stage, 10 GPM
TRACTOR HYDRAULIC SPECIFICATIONS for Model TVH03HYD
Force . . . . . . . . . . . . . . . . . . . . . 20 ton splitting force with tractor pressure of 2,000 psi 12.5 ton splitting force with tractor pressure of 2,000 psi 9 ton splitting force with tractor pressure of 1,500 psi
Includes
1 Base Unit1
1 Rail Unit (hydraulic cylinder)1
Rail to Base Assembly
2 Bolts (1/2-13 x 1-1/2”)
2 Lockwashers (1/2”)
2 Nuts (1/2-13)
Power Take Off Pump
1 PTO Pump with attached hoses
1 Chain2
Valve Assembly
1 Control Lever (valve) 1 Knob (valve lever)2 1 Valve Link2 3 Clevis Pins2 3 Cotter Pins2
Tractor Hitch Categories . . . . . . . 1, 2, & 3
Beam . . . . . . . . . . . . . . . . . . . . . 6" x 6" reinforced heavy-duty H-Beam, 68.5" long
Wedge . . . . . . . . . . . . . . . . . . . . High carbon steel, compound angle
Cylinder Stroke . . . . . . . . . . . . . 24 inches
Cylinder Size . . . . . . . . . . . . . . . 4" x 24" clevis type cylinder, 1.75" rod
Safety Release Control Valve . . . Detent, auto return
Log Opening . . . . . . . . . . . . . . . 25 inch maximum
Operating Positions . . . . . . . . . . Vertical/Horizontal
Pin Width . . . . . . . . . . . . . . . . . . 36 inches
Splitting Height (horiz. position) 30 inches
Shipping Weight
TMVH02/PTO . . . . . . . . . . . . . 563 lbs.
TMVH03/HYD . . . . . . . . . . . . . 535 lbs.
TRACTOR HYDRAULIC SPECIFICATIONS for Model TMVH02/PTO
Hydraulic Oil
Above 30° F . . . . . . . . . . . . . . Use AW-32, 10W (non foaming) or ATF Dextron III
Below 30° F . . . . . . . . . . . . . . . Use only ATF Dextron III
Hydraulic Tank Capacity . . . . . . . 7.2 gallon
Hydraulic System . . . . . . . . . . . . 9.5 gallon capacity (includes tank, cylinder, filter, hoses)
PTO SPECIFICATIONS
Force . . . . . . . . . . . . . . . . . . . . . 20 ton splitting force
Gear Pump (PTO) . . . . . . . . . . . Single-stage, 10 GPM
TRACTOR HYDRAULIC SPECIFICATIONS for Model TVH03HYD
Force . . . . . . . . . . . . . . . . . . . . . 20 ton splitting force with tractor pressure of 2,000 psi 12.5 ton splitting force with tractor pressure of 2,000 psi 9 ton splitting force with tractor pressure of 1,500 psi
Includes
1 Base Unit1
1 Rail Unit (hydraulic cylinder)1
Rail to Base Assembly
2 Bolts (1/2-13 x 1-1/2”)
2 Lockwashers (1/2”)
2 Nuts (1/2-13)
Power Take Off Pump
1 PTO Pump with attached hoses
1 Chain2
Valve Assembly
1 Control Lever (valve) 1 Knob (valve lever)2 1 Valve Link2 3 Clevis Pins2 3 Cotter Pins2