Pioneer chainsaws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ppppppppp!

The P65 came after the Pioneer Partner P62. When I bought my P62 new the dealer had a listing for the P65 but no info. When Poulan Pro took over the saw became Pro 655. A P65 is a very hard saw to find. I have brochure that shows one in a lineup.
Sure is a lot of P's in your sig P62
Lawrence
 
The Pioneer/Partner P65 had a smaller wrist pin, beefier crankshaft and had the unique piston with thick rings and no boost port. The rest of the saw was pretty much the same as the Pioneer/Partner P62.
 
singleken45 and others

New member singleken45 was looking for some measurements for a Pioneer puller.This is the one I have it's NOS.Maybe someone like FATGUY (Nik) or pioneerguy600(Jerry) could make these and sell them to us Pioneer fellas.
Petesoldsaw-BrushKing2008019-1.jpg

Petesoldsaw-BrushKing2008023-1.jpg

Petesoldsaw-BrushKing2008021.jpg

Petesoldsaw-BrushKing2008025.jpg

Lawrence
 
Ive got a P41 with a dud coil But apart from that its in top order
Now NOS and good secondhand parts are imposible to find in new zealand , So Ive heard that a homelite??? coil will fit is this true? or is there another way around it? Thanks guys
 
Owner's Manual

I have an original (generic) Owner's Manual (#431750 English/French) that I got with my FarmSaw (1979 or 80). I have scanned about half of it to *.bmp-s. I will post the entire thing once done to an image hosting site if anyone wants it. I do not have the ability to convert it *.pdf format. This raises 2 questions.
1. Would anyone like a copy?
2. Is someone willing to convert it to a pdf format? It is huge in bmp format.
Lou
 
.bmps are huge. You can't set your scanner to .jpg, gif, or .pdf ?
If not, you can convert the .bmps to .jpg using MS Paint. That will make them much smaller. If you can do that, I'd be happy to receive them and create a .pdf for you.
 
Do you have a program to combine the .pdfs into a single one ?
(Abobe Acrobat, or similar) If not, I'd be willing to do it.
send the files to brianc at knightkitchens dot com
 
Did my part.

It is sent, one group of 40 pages. If need be I can easily break it into 2 groups of 20. Thought it was time I contributed something beyond an occasional CraigsListing.
Lou
 
Well guys, here's a list of the Pioneer IPLs I have on .pdf so far:

IEL
Model AB
Model DC
Model M
Model RA (2 versions)
Super Twin

Pioneer
650
1073-2073
1200
1200A
1770-1771
2071
2200 and 2270
2400 and 2460
3071
3200 and 3270
Super 3270
Farmlite
Farmsaw
Farmsaw II
FM
Holiday II 970
Holiday II 1072
P10
P20 – P25
P26
P26E
P28E – P28ES
P28 – P28S
P38
P40
P41 Cutoff Saw
P41 – P41S
P42
P50 – P50S
P51
P52
P60
P61 Cutoff Saw
P61

Pioneer/Partner
P39 (1986)
P39+
P39+ (1987)
P42
P45
P52 (2 versions)
P52+
P62 (2 versions)
P65

Poulan Pro
455
655
655BP

Target
Quickie 42
Quickie 45, 52 & 65
Quickie 52 & 62
Super Quickie 45 & 65

I haven't had time to go through my printed stuff yet, but after I'm moved & settled in I'll try to list that as well.
 
Pioneer puller

New member singleken45 was looking for some measurements for a Pioneer puller.This is the one I have it's NOS.Maybe someone like FATGUY (Nik) or pioneerguy600(Jerry) could make these and sell them to us Pioneer fellas.
Petesoldsaw-BrushKing2008019-1.jpg

Petesoldsaw-BrushKing2008023-1.jpg

Petesoldsaw-BrushKing2008021.jpg

Petesoldsaw-BrushKing2008025.jpg

Lawrence

Thanks alot for your help . I have one fabricated but can't find any long screws to fit the threads of the flywheel .The longest I found was 1 1/2" but quite short . If someone could find me a couple of various lenghths , I'd pay for them & postage . Sorry but I can't remeber the size . Email me please at [email protected] . God bless
 
Thanks alot for your help . I have one fabricated but can't find any long screws to fit the threads of the flywheel .The longest I found was 1 1/2" but quite short . If someone could find me a couple of various lenghths , I'd pay for them & postage . Sorry but I can't remeber the size . Email me please at [email protected] . God bless

Do you not have a good hardware store nearby that has a good fastener selection?

I bought a $5 steering wheel puller from NAPA and then spent another $6 on extra long fasteners and now I can pull any flywheel on just about any saw, all for $11.
 

Latest posts

Back
Top