cuinrearview
Red saw lover
Well, we passed the month mark. Anyone give up on this yet? I installed new crank seals(with yamabond, I've never used it here but I have it so why not?), the flywheel(tight against the cut-out on the key), and the piston and cylinder. I've read that most of these need a gasket but have seen a few that didn't so I checked at each end of the piston pin.
So looks like we're gonna assemble it with no gasket. Had to take the daughter school clothes shopping so I didn't get any farther today.
So looks like we're gonna assemble it with no gasket. Had to take the daughter school clothes shopping so I didn't get any farther today.