question about back cuts (Moved from homeowner forum)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Johny Utah

Johny Utah

ArboristSite Guru
Joined
Jan 8, 2011
Messages
735
Location
In the dairy barn pulling tits for a living
When you back cut how important is the height relating to your face cut? If you leave a hinge say 4" tall as apposed to a 2" tall hinge. Sometimes my 2" turns into a 4" by mistake or a sloppy cut. Is this dangerous or does it not really matter as long as you have a hinge that is a proper depth into the tree? My main concern is safety not how good my hinge looks afterwards. Thanks in advance guys.:msp_smile:
 
forestryworks

forestryworks

Addicted to ArboristSite
Joined
Mar 30, 2007
Messages
3,927
Location
No
If you're falling trees into the open, no need for a raised back cut, IMO.

Falling through standing timber, a raised back cut is a good safety measure; especially if you know the tree you are falling will brush into another and bounce a second or two before rolling out.

However, you get that backcut too high, it will make some trees harder to wedge over.
 
bitzer

bitzer

******** Timber Expert
Joined
Jul 21, 2009
Messages
3,867
Location
Hardwood Country
Take the time to line up your cuts and you shouldn't have a problem with an 1" or less. I shoot for even. My guess is you are not in any hurry to get the tree on the ground.

I've yet to have a tree come back over the stump because of the hinge height and what the top is pushing through. Now lack of hinge, that might have something to do with it.
 
RandyMac

RandyMac

Stiff Member
Joined
Sep 16, 2008
Messages
14,474
Location
51st State of Jefferson
spiders0012.jpg
 
HILLBILLYREDNEC

HILLBILLYREDNEC

Addicted to ArboristSite
Joined
Apr 4, 2011
Messages
1,198
Location
Oregon
It depends on which style of face cut being used. Common 2-3 inches is ok. Humbolt 3-4 inches is ok. The most critical thing is to have a level back cut.
 
madhatte

madhatte

It's The Water
Staff member
Moderator
. AS Supporting Member.
Joined
Apr 19, 2009
Messages
7,367
Location
Just south of Puget Sound
If you're using the Humboldt undercut, the closing face acts as your stump shot. USFS teaches stump shot on the Humboldt undercut simply because they don't know any better.

I think they do know better; they just don't want to try to teach nuance. It's the difference between "production" fallers and production "fallers".
 
Jacob J.
Joined
Aug 26, 2001
Messages
17,587
Location
Oregon
I think they do know better; they just don't want to try to teach nuance. It's the difference between "production" fallers and production "fallers".

Some do, most don't. I spent 7 years in AG, and met maybe three skookum cutters out of hundreds of agency guys. Fortunately the agency put the non-skookum guys where they'll do the least harm- made them managers and specialists.

I met a falling boss once on a fire that had never fell a tree and had never even taken S-212.
 
Jacob J.
Joined
Aug 26, 2001
Messages
17,587
Location
Oregon
Whats a falling boss?

On the large fires it's a single resource boss-qualified individual that supervises falling teams bringing down the hazard trees.

The purpose of the position in ICS terms (Incident Command System) is to provide a layer of supervision for field workers to mitigate span-of-control issues. A qualified falling boss is supposed to have some knowledge of falling operations and hazard tree size-up so they can provide somewhat educated instruction to falling teams. They also need to be a skookum firefighter type so they can work with fire crews, line officers, etc. to provide for safety in falling operations on the line.

In this instance it was an individual (a timber sale admin) who was good friends with an FMO (fire management officer) who pencil-whipped his qualifications.
 
logging22

logging22

Cuttin to live, livin to cut
Joined
Oct 15, 2009
Messages
10,476
Location
southeast mo
On the large fires it's a single resource boss-qualified individual that supervises falling teams bringing down the hazard trees.

The purpose of the position in ICS terms (Incident Command System) is to provide a layer of supervision for field workers to mitigate span-of-control issues. A qualified falling boss is supposed to have some knowledge of falling operations and hazard tree size-up so they can provide somewhat educated instruction to falling teams. They also need to be a skookum firefighter type so they can work with fire crews, line officers, etc. to provide for safety in falling operations on the line.

In this instance it was an individual (a timber sale admin) who was good friends with an FMO (fire management officer) who pencil-whipped his qualifications.

Holy hell JJ. Thanks for the info. We dont have anything like that here. Just some part time fire fighters and wanna B's.
 
Jacob J.
Joined
Aug 26, 2001
Messages
17,587
Location
Oregon
Holy hell JJ. Thanks for the info. We dont have anything like that here. Just some part time fire fighters and wanna B's.

Yeah out here the big fires in tall timber can get pretty complex. Imagine if you will, a 22,000 acre fire in big timber and all of the snags and potential hazard trees have to be felled 500' inside the line and 200' outside the line all the way around the fire. I've seen as many as 16 falling teams in action at once, with 6 or 7 falling bosses. I spent 47 days as a faller on a 116,000 acre fire near Entiat, Wa. in '94. We even did "contour falling" on that fire which is where you fall rows of trees sidehill along the steep slopes to control erosion when the rain and snow comes. I heard later it didn't do a lot of good.
 

Latest posts

Top