I am in the process of repairing an Stihl 019 T. If anyone has worked on them before they know how good you get at taking them apart and putting them back together because you forgot to do something. I got the saw in a box from the local Stihl dealer after they charged the guy 40.00 to tell him his saw was junk. He asked if I could bring it back to life. Like an idiot I said sure. I replaced the seals and ring and put it all back together (a few times). I rebuilt and cleaned the carb. This is the Zama with the L adjustment screw only. Saw starts and idles fine. Accelerates crappy at the 1 1/4 turns out on the L screw. About 3 turns out it picks up better and goes up through the rpms. Now when you just touch a piece of wood with the chain it spits and sputters like its allergic to the wood and eventually stalls out. Strts up fine and idles fine again. I feel like I need to adjust the H speed screw if it had one. Any suggestions cause I don't want to pull this saw apart 5 more times just to take the carb off. I may just order the Walbro WT carb with the H adjustment on it.
You know when an 019T works they are a good saw but also makes me happy I own a 200T and I am not selling it so stay back.......
You know when an 019T works they are a good saw but also makes me happy I own a 200T and I am not selling it so stay back.......