Well, the manual is close to useless in this one aspect of removing the Carb from a Sthil 026. The throttle that is really a linkage of a bent wire going from the index finger trigger on the handle and then this bent wire twists its way over to the linkage on the carb itself so you can go from idle to full throttle by depressing the throttle on the handle. The manual does not give enough detail on how to remove this bent wire carb linkage going from the trigger on the handle over to the carb. Does one simple take a big screwdriver and pry the plastic handle appart on a 026 in order to remove this wire from the trigger? This wire has to be removed inorder to pull the carb off the studs. Wondering how other Sthil 026 owners did it.
Blair
Blair