Sorry if this has been covered already. I have a 028 with the SEM coil and I believe the coil is bad. I ordered the 000-400-1300 which should work from what I've read on here. Do I need to turn the flywheel to the Bosch keyway or leave it on SEM?
I understand that, my flywheel is clearly marked. I'm asking if anyone knows if the 000-400_1300 runs SEM or Bosch.
Thank manGotcha, SEM position is what you want, sorry.
Please don't try to return the coil....
Take off the muffler and peek at the piston.
If your fuel line in the tank is old, it may have become soft. When this happens the pressure in the gas tank (which builds up as the saw runs due to vibration) can cause the fuel line to collapse and close off stopping fuel flow....and it runs out of gas! (even with a full tank of fuel). Once it stop and the tank pressure goes away, then the line opens up allowing fuel to flow and you can start it again. So you might want to check that line inside the tank to see if it is soft and mooshy.
Enter your email address to join: