99busa
ArboristSite Lurker
Hello all of you tech guys, I am having problems with my 064. I have recently resurrected this old girl from the dead. It is currently giving me some ignition issues. It was running great for about an hour or two since i built it. Now it quit running. I replaced the old nasty coil wire, and very carefully looked at the yellow and black wires that go to the kill switch, and everything looks good. While i was putting it back together, i kept checking the coil for spark, and it is intermittent. It seems to come and go with tappping on the little module mounted onto the coil. My coil is part # 2 204 222 999 and then it has a small module that the black kill switch wire runs to. I assume this is the rev limiter box?? Is it possible to remove this module, as it seems it is intermmittently faulty. My coil is the three screw mount model. I couldn't find the 064 coil pdf that someone had posted earlier, so i'm lost as far as what flywheel/coil setup i have. (I found the PDF, and my coil isn't there???) It's running right now, but i know it isn't right, because it would fail the spark test while bolting the flywheel cover down, or tapping on the module area?? Any ideas will be much appreciated. Thanks
Last edited: