Mastermind
Work Saw Specialist
Rubber washers in the intake maybe?
Thats the extent of what I would do at home ........... if it was mine, the time for a trip back to the dealer has come.I actually already pulled the carb, inside the intake looked clean and no washers to speak of. I double checked the fuel hose and impulse hose, both tight and no kinks. I raised the metering arm level by .005" and did another reset, that didn't help, nor did it change anything
Open the carb wide open and shine a light in there. Make sure there ain't no washers in there.
Enter your email address to join: