Jimmy in NC
Addicted to ArboristSite
Morning!
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
- Joined
- Feb 17, 2009
- Messages
- 16,693
- Reaction score
- 15,929
- Location
- Beautiful Rockbound Coast of Maine
Nothing but cold here +5 this morning......0 tonight.....-7 tomorrow night....tiny dusting yesterday morning.....clear cold skies this week.....full of cold 'Nadian air.....guess those 'Nadians like to share.
They sure do Robin ! Keep sending that **** down here too !
That`s one thing we don`t want to keep all for ourselves.....LOL
Somethings are NOT nice to share !! 
Jimmy in NC
Addicted to ArboristSite
Just like Stihlotitis and Stubby's rash....Somethings are NOT nice to share !!
There is 2 more things NOT mice to share !!
Jimmy in NC
Addicted to ArboristSite
I know... could be considered acts of terrorism.
Ron found yer Rum stash ! LOL
Ron can keep that Screech all fer hisself
Page 2 
Screech at Ron's house , he can have it all , I'll keep the Crown for here
Screech at Ron's house , he can have it all , I'll keep the Crown for here
Next thing you know Ron be braggin the virtues of Roncarioci an Baccardi .......Blech , rather be drinkin the Yagi ......
- Joined
- Feb 17, 2009
- Messages
- 16,693
- Reaction score
- 15,929
- Location
- Beautiful Rockbound Coast of Maine
Page II Alert!!!!
Ron, John, Is this what you're looking for?????
http://store.chainsawr.com/products/jonsered-490-chainsaw-44mm-windowed-piston-kit-503-10-02-01-new
Ron, John, Is this what you're looking for?????
http://store.chainsawr.com/products/jonsered-490-chainsaw-44mm-windowed-piston-kit-503-10-02-01-new
That is the piston made for the Husky 350, it fits the 44mm Partner/Pioneer based saws perfectly. I used one John sent me two years now and she`s runninng sweet.
Page 2
Screech at Ron's house , he can have it all , I'll keep the Crown for here
Crown is only seconf to JD Old #7, Single Barrel and Gentlemen are #1!!
Almost , just needs to be one mm bigger. LOL Ron needs a 45mm piston , one from a 590 would work !
Too bad there isn`t a piston that comes close to the 45mm used in those saws, I did read someplace that there is an AM piston that was made for them or made for another saw but will work in the 590. On some of our discussions a chap that use the AS name, Jerimiah Johnson seems to know a great deal about these saws.
Kevin , he got rid of all his 490/590 stuff last year for some reason ? Goes by cut for fun on the other place.
