i have not verified this vids bona fide but i like what i see
the all aussie dribble thread!
- Thread starter masculator
- Start date
Help Support Arborist Forum:
lumberjackau
ArboristSite Guru
After watching this I noticed one thing, nobody is running around on the ground, almost like it is just a bunch of vehicles parked in the desert for target practice.
yes as disinfo plagues news and reporting ATM im digging away to verify tho so far it seems legit enuff but cannot find if this is old recycled vid from some other air attack . Perhaps them Daseh towel heads are stupid enuff to line trucks up in the open but it prolly will turn out to be Kurds or some other moderate anti Asard mob that Putin has in his sights & not the black jim jam black flag cock heads.
oh their killing hotel guests in Mali Bamako ATM FFS
Jimbo209
ArboristSite Guru
Thanks Benne. Chippy was right
your heart at keeping on top of this for us.The Service report call came back at lunch today at $300 + other bearings and such bound to fail soon vs $430 for new head.
Boss's one had a crack in the housing 2 screws at the pole end. My second hand one had symptoms of water inside.
We are Keeping both heads for spares/practice sharpening
Stihl working hard
Is it Friday yet
Awesome job on the muffler VinceBlack looks better. [emoji6]
2strokenut
One nut loose
went down to the shed to fix this the belt drive had come off
but i got side tracked
love the old air rifle not enuf power to dent the steel wall sheeting but enuff to kill the little buggers.
but i got side tracked
love the old air rifle not enuf power to dent the steel wall sheeting but enuff to kill the little buggers.
VinceGU05
PSA vitim.
thanks todd.Awesome job on the muffler Vince
2strokenut
One nut loose
luke 23 verse 34
um can you see why my saw wont go its hard to start & wont idle,,,, er ok lets have a look hmm nice newish 311 stihl the chains new but blunt oh i see you put oil in the fuel and fuel in the oil,,,,, i dumped cleaned the tanks twice pulled the fudge out of it got it going with a lot of smoke sharpened up the chain and give half a chance of surviving another 1/2 a tank before,,,, oh sigh
um can you see why my saw wont go its hard to start & wont idle,,,, er ok lets have a look hmm nice newish 311 stihl the chains new but blunt oh i see you put oil in the fuel and fuel in the oil,,,,, i dumped cleaned the tanks twice pulled the fudge out of it got it going with a lot of smoke sharpened up the chain and give half a chance of surviving another 1/2 a tank before,,,, oh sigh
looks a tad crotchety much same as my IAC lever but loads easier ejects better their bout for more of less 1000 if i wos a farm boy with yonks of ferals be handy fun
2strokenut
One nut loose
be good for roos on the run with bb shot i was thinking
Straight oiling a saw is preferable to straight gassing it I suppose?
herbs
ArboristSite Operative
My Adler is heaps better than that. Only issue it's had is the stock coming a bit loose, tightened up the stock bolt and all good. Feeding has been flawless and it points nicely.
Also, got myself a new saw, Makita 7901, threw a HD filter on it and happy days. Only things I don't like about it is the HD filter cover fit is very tight on the RHS and the stop switch, being non auto return has already made me look like an idiot. As for my 562, it's having issues. It won't rev, just runs real rough when I increase revs. Air leak perhaps? I have had the jug off and installed a new base gasket as the old one leaked. Checked it's all tight but no good. Major frustration.
herbs
ArboristSite Operative
I bought it from ebay, I'll pm you a link to old mate's auction, he's in the U.S.
Thanks. I think I may have spied a mythical Japanese 20" lightweight (but solid, not laminated) picco bar in their list of auctions too.
2strokenut
One nut loose
is that you kiwi
Pre haircut earlier this week. Tad more respectable now but can't part with the beard until end of Mo'vember.
2strokenut
One nut loose
you could pars off as one of my bro's if you live near Wihi
