The Bestest Bestest Saw Poll

[wyk]

OK, enough talking and more voting. Vote early - vote often.

Polls only have 10 options available so I crunched them into groups as best I thought I could get away with, and only included the big 3. The MS441 and Dolmar 5100 explode-o-matic are missing because, well, they should be missing from this poll And many older models are missing as well. And, uh, many newer models are also missing. And YES, I know it isn't fair to cram the 064 in with the 660, but whattaya expect for free? Vote now and deal with it afterwards.

You may choose as many options as you like.

 

[Homelite410]

The best saw is the one that is most useful, requires the least amount of maintainance, and starts in less that 3 pulls!

 

[justtools]

The best saw is the one that is the one that the individual owns. If the individual owns more than one than it is the one fueled with a sharp chain ready to cut.

 

[Country1]

Didn't see the Bestest of the Bestest saws listed....
So, unfortunately me no vote...:monkey:

 

[huskydude]

where is the obligatory "wild thang" choice?

 

[J.W Younger]

The best saw is the one that is most useful, requires the least amount of maintainance, and starts in less that 3 pulls!

the under3 pull start would elimate all mine cept the 460 and thats only if i'm using it pretty regular.

 

[audible fart]

MS390 not offered as poll option means poll is gay.

 

[super3]

The best saw is the one that is the one that the individual owns. If the individual owns more than one than it is the one fueled with a sharp chain ready to cut.

There ya go!

 

[SawTroll]

MS390 not offered as poll option means poll is gay.

:msp_laugh::msp_laugh::msp_lol:

 

[jrr344]

Why is it the most notable and sold saw in the universe not mentioned? Poulan RULES

 

[Country1]

:biggrinbounce2: :biggrinbounce2:

 

[Ambull]

Only one Dolmar choice and 5 Stihl choices. There is a term for this. "Divide and Conquer"

 

[SawTroll]

Only one Dolmar choice and 5 Stihl choices. There is a term for this. "Divide and Conquer"

It mostly works, and a poll can be manipulated to tell about whatever you want it to, by the way the question is asked and what the options are.

I don't think the OP did that on purpose in this case, but the end result is the same....

 

[robfromaz1977]

Only one Dolmar choice and 5 Stihl choices. There is a term for this. "Divide and Conquer"

Thats why I voted for Husky!

 

[nmurph]

Only one Dolmar choice and 5 Stihl choices. There is a term for this. "Divide and Conquer"

yep, 5-1 is about what it takes. JK.....i like saws from every brand. if i could only own one saw to do every bit of my cutting, and it had to be stock, it would be a 7900. i could use an 18" to minimize weight and it will pull a 32" full comp. thank God i'm not limited to one.

 

[wyk]

It mostly works, and a poll can be manipulated to tell about whatever you want it to, by the way the question is asked and what the options are.

I don't think the OP did that on purpose in this case, but the end result is the same....

The OP's original purpose has little to do with the actual poll itself.

 

[Bob Wright]

I don't think there is one answer to the question and there never will be. But what ever saw works well for you is the best answer and your pick might not suit anyone else. Just my thought...Bob

 

[WKEND LUMBERJAK]

Had to go with Dolkita 7900. Cause that was the only saw on the list that I have mine wears blue and grey. The Olympyc/Efco 962 wasn't on the listed.

C.A.D. Stinks!!

 

[wyk]

Only one Dolmar choice and 5 Stihl choices. There is a term for this. "Divide and Conquer"

You may have a point. I am somewhat surprised at the 7900 love so far.

 

[nmurph]

You may have a point. I am somewhat surprised at the 7900 love so far.

i'm not......you are one of the few that has not been impressed with the 7900. some like other saws better, but nearly all give the saw high praise.