tn fall gtg 460 build off date oct 1st

[wigglesworth]

I just flung it out there and stuff. :msp_tongue:

Flung stuffing? Weird....

 

[blsnelling]

 

[blsnelling]

 

[blsnelling]

 

[Mastermind]

Flung stuffing? Weird....

Food fight??? Maybe?

What was it you were talkin about? :msp_unsure:

 

[blsnelling]

That's all of my pics. Now, for tons of vids to work on.

 

[little possum]

Thanks for sharin fellas! Needed that to calm be down a bit. But did make it back from our venture, so thats always a good thing I do hate that I missed meetin some newbies :jester:

 

[sunfish]

Thanks for the vids and pics, folks! Wish I could have been there!

 

[blsnelling]

This is a conglomeration of clips.

<iframe width="640" height="360" src="http://www.youtube.com/embed/xY3xu-8c3I4?rel=0" frameborder="0" allowfullscreen></iframe>

 

[blsnelling]

Here's my copy of the build-off saws.

<iframe width="640" height="360" src="http://www.youtube.com/embed/D7QIoPMuW2Y?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/KHk7T-_Eg3w?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/9SB-6uwJVpc?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/rhdFRQRyVkg?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/ATfQNK4X94o?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/xQQJz-FOlmY?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/yR6NH9k7EmU?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/Xn4QvoMnhBs?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/kGOQqxM-XX4?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/p1Eo3RdNRrc?rel=0" frameborder="0" allowfullscreen></iframe>

 

[RiverRat2]

In tha back?????

I thought I was going to like you when I met you today, but then you went and stabbed me in the back! What's up with that? :jester:

Just got to Covington La, to my brothers house about an hr. ago a bit over 600 Miles in 8.5 hrs!!!!


Hate to be tha one to break it to ya Brad,,, That wasn't a backstabbing,,,it looked pretty much in your face!!!!!! LOLOL!!!!!!:biggrin:

 

[anymanusa]

Wow. Wish I was there.

 

[parrisw]

Hey Brad, I think ya got mine and Riverrat's vids mixed up.

 

[RiverRat2]

Nice Job Brad,,, It was cool finally meeting you and the others from the website that were in attendance

you have my saws videos flipped in the finishing order (really no biggie just clarifying),,,I built the one with the 3/4 wrap,,, Parrisw did the one that was 1/2 wrapped and was so horribly fat it couldnt recover when I hung the dog and then slipped and over-crowded the feed rate,,, that double loaded it up with even more fuel that it couldnt clear out,,, I logged a couple of good stands of Pine (over 63 tons) with both of those saws swapping on fuel tank fillings for about 15+ tanks of fuel each for about 5 half days of solid falling, bucking, and limbing tops,,,, the saw Will modded always seemed noticably tad bit stronger to me

knowing that,,,, from first hand experience I tweaked it a bit leaner after the competition runs and it picked up 4 seconds from 26 too 22 seconds verified by the event timer,,, which would have still been 3rd then my my saw 4th with a 23 second cut,,, go figure,,, Dont get me wrong I'm not saying it would have beaten your saw,,,,I'm just thinking Wills build may have finished better than 9th anyways,,, I started to tweak my build and try it again but ran out of time,,, who knows??? I did learn a little bit and hopefully,,, I can do better next time,,,

I must say sincere congratulations are in order on a great finish for you and Randy and all of the other participants and distinguished guest,,, TLandrum is a good dude!!! Awesome Job Mrs Anne & the Girls with the food & hospitality as always!!!! Hey Mr. Galde great job on he lunch chores contribution,,, good seeing you

Brad, your dad really made me laugh tday with the dolmar project saw,,, he seems like a great guy,, I really enjoyed the event,,,

We retuned and ran stumpys again and it pulled somewhere in the 28s...... It was pig rich in the first run.

I had two almost that bad!!!! but not quite,,

 

[RiverRat2]

Nice Toys!!!

That's all of my pics. Now, for tons of vids to work on.

Brad, I have to say those two Old saws of yours particularly ti 090 and the 064 are even nicer up close and in person than they appear on the website,,, Really sweet collectable stuff,,, and nice camera stuff too!!!

 

[o8f150]

Ummmmm..... Yea!!!

I'll start the bidding at $3.14 and a pack of big red.

I did get a couple vids of Durands 372. I really liked that saw!!

<iframe width="560" height="315" src="http://www.youtube.com/embed/7AlUVTI8XNw" frameborder="0" allowfullscreen></iframe>

sorry jer,,, my bid is 10.00 and a case of beer

 

[o8f150]

Here's my copy of the build-off saws.

<iframe width="640" height="360" src="http://www.youtube.com/embed/D7QIoPMuW2Y?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/KHk7T-_Eg3w?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/kGOQqxM-XX4?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/rhdFRQRyVkg?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/ATfQNK4X94o?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/xQQJz-FOlmY?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/yR6NH9k7EmU?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/Xn4QvoMnhBs?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/9SB-6uwJVpc?rel=0" frameborder="0" allowfullscreen></iframe>

<iframe width="640" height="360" src="http://www.youtube.com/embed/p1Eo3RdNRrc?rel=0" frameborder="0" allowfullscreen></iframe>

now that sounded cool,, go down the line and click on the vids and have them all playing at the same time,, sounded like a bunch of angry bees

 

[Mastermind]

now that sounded cool,, go down the line and click on the vids and have them all playing at the same time,, sounded like a bunch of angry bees

My "out in the sticks" DSL is way too slow for that. :msp_mad:

I just can't say enough good things about what a great job Terry and Anne do on these GTGs. The lunch spread was huge, all the wood a guy could cut, fire to warm the old bones by....... I mean really, the guy and his family went all out for this event.

Thanks so much Terry. You are the GTG king my friend!!!!

 

[STIHLTHEDEERE]

good work all! not a loser in the bunch, when everyone gets together and enjoys a common hobby, everyone wins. looks like all the saws were well built and very strong runners!

 

[Stumpys Customs]

Congrats Randy,

Well, I guess I need to git back to the drawing board. Just proud to even be in the comp. Looks like ya'll had a blast with the fine weather. I just hope JW aint too mad @ me:bang: I'll prolly do sum changes to it before I return it too him.:msp_wink: