To my ear it sounds like the idle speed is too low. Turn the LA in until the chain starts to run, and then back it off until it stops.
The 026 is back together, with a new carb kit. I set the H and L out 1 turn and it dies out after it idles for a few seconds.
This is what it sound like, How can I adjust the carb and improve this?
Thanks, Bill
Sure could, it almost sounds like the needle is letting too much fuel in. Try turning the low jet in a little if the speed doesn't pick up that would point to needle. bsnelling described tuning it well. SteveWhen I rebuilt the carb, the kit recomended a .060-.070 gap from the top of the needle lever to the edge of the carb. I eyed this gap in.
Could the needle lever adjustment be causing these problems?
Thanks,
Bill
Sure could, it almost sounds like the needle is letting too much fuel in. Try turning the low jet in a little if the speed doesn't pick up that would point to needle. bsnelling described tuning it well. Steve
Enter your email address to join: