KenJax Tree
Terraphobic
Or oil and ratiolf the op has bought a saw and we want to get this thread to 30+ pages the op only needs to ask what is the best bar and chain to get.
Or oil and ratiolf the op has bought a saw and we want to get this thread to 30+ pages the op only needs to ask what is the best bar and chain to get.
lf the op has bought a saw and we want to get this thread to 30+ pages the op only needs to ask what is the best bar and chain to get.
That is the question to get it to page 50...No no no no... he only needs to ask the magic question:
What oil should I use in a 60cc saw?
And the answer would be JASO FD 40:1 in super E0 gas. And Canola bar oil.
I didnt get a saw yet, but now that u mentioned it, what is the best bar and chain? lol. See how long this thread will get.lf the op has bought a saw and we want to get this thread to 30+ pages the op only needs to ask what is the best bar and chain to get.
Must be a reduced wieght bar even if you need to pay 5x regular price and freight it from other side of the globe. Preferably Japanese and shinny as a mirror however cannon is releasing a new light bar which many are waiting for. l have a 15" 0.058 bar on a 555 with 9pin drive sprocket running stihl .325/.063 26RM chain. Wierd combo 063 chain in 058 bar but l run the chain in first on an 063 bar to wear it a bit then it fits nicely in the 058 bar. Windsor Speed tip RSN. Make sense??I didnt get a saw yet, but now that u mentioned it, what is the best bar and chain? lol. See how long this thread will get.
How do you find the 9 pin? When I've tried 8 pin 325 I found it got dull quick, I can only imagine 9 pin being worse.Must be a reduced wieght bar even if you need to pay 5x regular price and freight it from other side of the globe. Preferably Japanese and shinny as a mirror however cannon is releasing a new light bar which many are waiting for. l have a 15" 0.058 bar on a 555 with 9pin drive sprocket running stihl .325/.063 26RM chain. Wierd combo 063 chain in 058 bar but l run the chain in first on an 063 bar to wear it a bit then it fits nicely in the 058 bar. Windsor Speed tip RSN. Make sense??
The short obvious answer is tsumara light and tough bar wearing stihl chain.I didnt get a saw yet, but now that u mentioned it, what is the best bar and chain? lol. See how long this thread will get.
Yepp 562XP very good choise.I was in the same boat a month ago and went with a Dolmar 6100. Better filtration and power than the
stihl and not far behind the 562 for power. Better price to boot.
If money is no object the 562xp can't be beat though.
That is the question to get it to page 50...
And I like your answer! Mine would have been the same! I would only have added ISO-L-EGD and APT TC.
7
Must be a reduced wieght bar even if you need to pay 5x regular price and freight it from other side of the globe. Preferably Japanese and shinny as a mirror however cannon is releasing a new light bar which many are waiting for. l have a 15" 0.058 bar on a 555 with 9pin drive sprocket running stihl .325/.063 26RM chain. Wierd combo 063 chain in 058 bar but l run the chain in first on an 063 bar to wear it a bit then it fits nicely in the 058 bar. Windsor Speed tip RSN. Make sense??
Yepp 562XP very good choise.
Run better then my MS390 an that's a 64cc.
Hi windthrown,APT TC is obsolete, and beat to death by JASO FD. ISO-L-EGD is pretty much the same as JASO FD (but slightly superior to it in nit-pick Troll terms). We could jack this thread and turn it into an oil thread...
Hey 7, since you are in Austria, have you heard anything there about the MS462 yet? The OP brought up the option of getting a 461 here.
The 555 has standard (large) spline clutch drum so 7&8 pin .325 drive sprockets are hard to find, so 9 is what l have. It is quite a fun fast setup in sub 14" wood. Would not be my fist pick if wanting to run a 20"bar in bigger wood, but makes a fast light limbing saw....good throttle response and enough nuts to run 9pin in smaller wood. Before l tried it first l thought l would go back to 7pin 3\8.....but l got a bunch of stihl 26RM so wanted to give it a go and she's staying that way for a while.How do you find the 9 pin? When I've tried 8 pin 325 I found it got dull quick, I can only imagine 9 pin being worse.
The discussion at the moment is the release of the new lighter and more powerful 261 and 362. 261 300g lighter and 4 hp and 362 200g lighter is what is known.
I like 325 when I'm killing olives. All those little stems are horrible with 3/8.The 555 has standard (large) spline clutch drum so 7&8 pin .325 drive sprockets are hard to find, so 9 is what l have. It is quite a fun fast setup in sub 14" wood. Would not be my fist pick if wanting to run a 20"bar in bigger wood, but makes a fast light limbing saw....good throttle response and enough nuts to run 9pin in smaller wood. Before l tried it first l thought l would go back to 7pin 3\8.....but l got a bunch of stihl 26RM so wanted to give it a go and she's staying that way for a while.
Enter your email address to join: